Making a picnic table with your own hands: step-by-step instructions. How to make a round or rectangular table from wood. Making a garden table with your own hands Garden tables

A dacha is, of course, the place where you want to take a break from the bustle of the city, to breathe Fresh air and just drink fragrant herbal tea on the veranda. And decorating the dacha with furniture made by yourself will add a special charm to such a simple ceremony.

When choosing materials for a table, first of all you should pay attention to the quality of the wood - not all wood is suitable for use. Conifers, such as spruce and pine, are pliable and easy to work with, but such material without proper treatment is more flammable, and the resins released can ruin the tablecloth.

Hardwoods (aspen, oak, ash) are more advantageous; products made from them are strong, durable and have an attractive appearance.

Materials and tools

For interior design of dachas and country houses Long narrow ones are more acceptable, allowing you to move around the room unhindered. This should be taken into account when preparing everything necessary for work and designing the table itself.

For the table, it is preferable to use a board with a thickness of at least 30 mm. This thickness will ensure the strength of the table and the ability to withstand heavy loads. The optimal length ranges from 150-200 cm. You can purchase two ready-made wooden shield size 30-2000 mm.

Balusters or wooden beams for legs. Curly balusters will give homemade table industrial chic and luxurious look. And to make legs from timber you need to choose boards minimum cross-section 50x50 mm. Comfortable height The table is provided with a leg height of approximately 73-75 cm.

Other materials and tools

1. Boards 20 mm thick and 8-10 cm wide for the tabletop frame.
2. Wood putty.
3. Screwdriver and screws for 30 and 50 mm.
4. Sandpaper of various grits, as well as a holder.
5. Clamps for fixing legs and table top.
6. Electric drill.
7. Sander.
8. Building level.
9. Square.
10. Tape measure or centimeter.
11. Marker.
12. Glue.

Manufacturing stages

When preparing materials, all boards and beams are processed with a plane, sander or coarse-grained sandpaper to remove irregularities, remnants of cut knots, and clean cracks. The boards must be even and smooth, so they are sanded on all sides, including the ends, edges and corners.

If it is intended to be manufactured as a solid panel without gaps, then it is better to purchase tongue-and-groove materials - this will create a stronger adhesion of the single sheet and save time on adjusting the elements. Chamfers are cut from the edges of the beams for the legs.

Assembling the frame for the tabletop

The frame helps to enhance the strength and stability of the table; its dimensions depend entirely on the parameters of the table top, but there are several general rules: both in length and width, the frame should be 30-25 cm smaller than the tabletop.

Video - Making a dining table for a summer house

The frame itself is assembled from 4 boards that form the outer frame, and 6 internal transverse strips. The boards are installed on the edge at a right angle using a square and tightened with 50 mm self-tapping screws. The joints are pre-coated with glue (PVA or wood glue). To prevent the boards from splitting, you can drill guide holes in them and only then screw in the screws.

Along the length of the frame, markings are made for the transverse strips, and guides are drilled. It is very important that the cross members are strictly perpendicular to both sides of the frame frame. The ends of the transverse strips are coated with glue, and the entire structure is fixed with self-tapping screws. Make sure that the screw heads do not protrude, but are completely “recessed” into the wood.

Table frame (production option)

The tabletop boards are connected, aligned with a tape measure and laid face down on the floor; a frame is placed on top so that the transverse planks lie tightly on the tabletop. Guides for self-tapping screws are drilled into the planks, and all elements are tightened with 30 mm screws. There are 5-6 screws for each cross board.

Assembling the table legs

The tabletop is placed on a workbench or several stools for subsequent installation of legs. The table leg is fixed in the corner of the frame with clamps, and guides for self-tapping screws are drilled into the frame.

Before attaching the leg, glue is applied to the end of the block - this will protect the table from loosening and will contribute to greater strength. It is recommended to fix the leg on each side with four screws, but if desired, you can additionally use metal corners. Round balusters are fixed with long self-tapping screws on the front side of the table, and square balusters are fixed with corner fasteners.

Finishing

After installing the legs, the table is turned over and placed on the floor. Depending on the design of the table, the corners are sawed off along the radius with a jigsaw or the end is completely rounded. You can cut chamfers from the edges of the tabletop and sand everything thoroughly.

If necessary, scratches and cracks resulting from the work are repaired using wood. It is better not to touch the screw heads so that the structure can be tightened.

After the final sanding, all dust and shavings are removed from the table, and the product itself is covered with stain or several layers of varnish.

Tables with elements of decoupage decor or single painting look beautiful and unusual. But hiding the beauty natural wood there is no need to put it under a layer of paint; modern varnishes and impregnations will do the job necessary work to protect the product from moisture.

Video - Table with legs for a summer house

Option 2. Table made from a stump

An unusual and non-standard way to arrange a personal space is to create interior items from natural materials. When landscaping an area, trees that are old or that threaten buildings are often cut down. If your dacha has or had just such a tree, then you definitely won’t have any problems finding a suitable stump. If the idea came spontaneously, then you can look for the desired stump in clearings, in the nearest forest, or ask the owners of neighboring plots.

Materials and tools

To make such a fantasy table from a stump you will need very little:

• wood for the tabletop, the recommended thickness of the tabletop is from 20 mm, when choosing boards you need to adhere to the rule “the larger the tabletop, the larger the cut of the board”;
• stump. For the work you will need a dried stump of any type of tree, the main thing is that the wood is intact, not damp or rotten. If the tree was cut down recently, the stump needs to be dried thoroughly. And it’s better to do this by placing the stump in a warm dry room or at outdoors in sunny weather. It must be remembered that several weeks is not enough time for proper drying. As a rule, the entire process takes at least two months. You can determine the condition of the wood by the ease of removing the bark - if the bark comes off without effort, then you can start working;
• wood varnish on water based natural shade or transparent. It is this composition that will best emphasize the texture and advantages of natural wood;
• sandpaper of various grain sizes and holder;
• plane or sander;
• chisel;
• building level;
• roulette;
• hammer and nails;
• screwdriver and screws;
• abrasive fiber.

Manufacturing stages

Stage 1

The dried blank of the future table must be cleared of bark. A chisel or chisel will be useful for this step. The bark must be removed with extreme caution and precision so as not to damage the wood and prevent cracks and splits from appearing. Any soft or rotten areas should also be removed.

Stage 2

After the bark has been removed, the stump needs to be leveled relative to horizontal plane. To do this, use a level to prepare a flat surface, and place the base of the future table on it.

If curvature is observed, the imperfections are eliminated using a plane. At the same stage of work, excessively large rhizomes of the stump and all unnecessary parts are sawed off with a hacksaw, the sections from which are then sanded.

Stage 3

The leveled stump is sanded with a disk grinder, especially its horizontal parts. The sides of the stump are also sanded, and hard to reach places processed with coarse sandpaper. This is a rather labor-intensive process that requires a significant amount of time.

Stage 4

Cracks and depressions in the barrel must be cleaned of dirt and debris using a chisel, then sandpaper folded in half (with the working layer facing outward) should be carefully processed from the inside. Remains of wood dust are cleaned with a brush or a construction vacuum cleaner.

Stage 5

To prevent the stump from rotting and ensure air circulation between the table and the floor, furniture legs can be attached to the base from below. The presence of legs will make moving the table more convenient.

You can choose any legs: metal, furniture wheels or special rubberized stands. It is best to attach them using self-tapping screws to the base of the stump; the number is chosen arbitrarily, based on the size of the table.

Stage 6

After installing the legs, we proceed to sheathing the top of the stump. To do this, we put two parallel strips perpendicularly on the sidewalls, and two more rows of holders on top - a total of 6 strips, fastened together with nails. This will be the frame for the table top.

Stage 7

We fasten the prepared tabletop boards from below cross bars. The shape of the tabletop can be very diverse: round, rectangular, with rounded corners. A table option with a round or oval tabletop looks more advantageous.

To give this shape, you can use homemade device from thread, pencil and nail: the end of the thread is tied around a pencil, and the tip of the nail is placed in the middle of the tabletop, outlining a circle with a selected radius, after which all excess is sawed off, and the edges and surface of the tabletop are processed with a grinding machine.

Stage 8

Holes and defects in the boards can be decorated with finely chopped shiny stones, filling them with varnish and after drying, sanding them again to smooth the surface.

The finished tabletop is fixed from below to the sheathing with holders on nails or self-tapping screws selected to size.

The finished table is varnished in several layers. After applying the first layer, the product is thoroughly dried and processed with fine-grained sandpaper. This will prevent the varnish from peeling off, and subsequent layers will lay down more evenly.

After removing the dust, apply the second and subsequent layers of varnish without grouting. If desired, after drying last layer can be treated with abrasive fiber - this will remove excess shine and give the surface a matte finish.

Such a creative table will decorate any veranda, especially if surrounded by green bushes or flower beds.

Video - DIY garden table made from a stump

A garden table is an integral part of any country interior. On modern market This product is presented in a wide range - these are products made of metal, plastic, natural stone and, of course, classic version, wooden garden tables. In this article we will talk about the positive qualities of common options and give accessible instructions on assembling a table with your own hands.

Wood is always relevant

Majority garden furniture has always been made of wood. Almost anyone with at least a passing command of a hacksaw and a plane can make a garden table with their own hands. The whole process comes down to joining a small number of planed planks and giving the furniture a marketable appearance.

A few words about the choice of material

If you want your product to serve you faithfully long years, then it is better to make a garden table from strong hardwood. Of course, the most the best option is oak, but the price here, even at cost, will be considerable. Therefore, as a rule, more affordable larch, aspen, birch, linden or acacia wood is used.

Advice: conifers they can be used for manufacturing, but they must first be well prepared and coated protective compounds. Otherwise, the abundance of resin may negatively affect the quality of the coating and your clothes.

For a countertop, the quality and type of wood are especially important, so experts recommend not saving money and buying a good tongue-and-groove board; the increase in costs will be minimal, but the appearance will pleasantly please you. Wood garden table It is advisable to collect from well-dried wood, so that later the parts do not fail.

In addition, the tabletop and some individual parts can be made of thick waterproof plywood or USB board. Chipboard (chipboard) is less suitable because this material It is afraid of high humidity and will not last long in the garden.

Self-assembly

Assembly instructions can be very diverse, everyone chooses what he likes best.

The photos and videos in this article show several interesting and available technologies, we will tell you about the simplest, in our opinion, installation option.

• As mentioned earlier, it is better to assemble the tabletop from a tongue-and-groove board, so it will be completely monolithic. The joints should be glued with regular furniture glue on wood. IN in this case We will talk about a solid product designed for a family of 6 – 8 people.
• Comfortable design height for standard dining table is 700 – 750 mm. We will make the dimensions of the top plate 930x1450 mm. For a tabletop, a board thickness of 20 mm is sufficient, but a tabletop 40 mm thick will look more solid and solid.
• The boards are joined on a flat, horizontal surface and knocked down with nails or self-tapping screws, two or three perpendicularly located 50x50 mm bars. The bars are fixed at a distance of 300 mm from the edge.

Advice: since the wood is quite dense and thick, it is better to lubricate the screws with soap before screwing them in. Then they will fit into the array much easier.

• Next we move on to arranging the legs. Boards with a section of 50x150 mm and a length of 650 mm will be used as legs. They will be joined at the ends, so in order to reduce the length of the fixing bolts or self-tapping screws, 1 cut is made in the middle on each leg, about 70 mm deep and about 150 - 200 mm long.
• The legs are joined at the ends, and the selected grooves should be with outside on the same level. A stiffening rib is inserted between two pairs of legs, the function of which is performed by a 50x150 mm board, about 1 m long.
• From above, the legs are attached to the strips that secure the tabletop boards. In the lower part, to increase the support area, two boards of the same section 50x150 mm are tacked to the legs. The length is slightly less than the width of the tabletop.

Important: the entire structure, with the exception of the tabletop, can be made collapsible; for this, furniture bolts with a diameter of 6 mm are used. Or assemble everything with long self-tapping screws, but then the table will not be disassembled.

Do not forget that wooden garden tables will be used outdoors, so all wood must be coated with protective compounds. Often one layer of stain is used to reveal the beauty of the texture and two layers of waterproof varnish.

Important: all wood must be planed and cleaned with a sanding machine or sandpaper before assembly. WITH sharp corners the chamfer should be removed so as not to drive the splinter in later.

Alternative designs

Easy coffee table it is quite possible to assemble from wooden pallets. For this you will need 2 pallets. The top row of boards should be torn off, the missing ones should be supplemented and knocked together end-to-end, more tightly.

Thus, you will get a monolithic countertop. To increase the height, 4 bars from the same pallets are inserted between the pallets. It is advisable to install furniture wheels from below.

Plastic garden tables are used everywhere, their price is quite affordable. They are durable, have a neat appearance and, as a rule, are quickly disassembled. But plastic rarely fits into the natural interior of a country cottage. Artificial materials, for the most part, have already become boring in the city, and besides, such products cannot boast of durability.

Forged garden tables are a completely different matter; they are often true masterpieces of furniture art. Of course, only a narrow circle of real specialists can make such beauty with their own hands, which is why the price of such products, frankly, is steep.

Making stone garden tables with your own hands is quite problematic. Alternatively, you can stack the brick cabinets and install a pre-purchased countertop on top. Can also be used as a tabletop large piece slate, but such installation will require considerable physical effort.

Option for making a table.

Conclusion

Often it is not so important whether you have a wooden stone or metal garden table installed. Any design can be successfully fit into landscape design dachas, the main thing is to do it with love, because you are doing it for yourself.

You can make a garden table with your own hands from scrap materials, which many will find absolutely useless. We offer you unusual ideas for the dacha, which relate to the creation of various garden furniture and tables, among others. Look at the photos of garden tables and choose the best option for yourself. When implementing any idea for a summer house, you can use your imagination and make the changes you need.

How to make a garden wooden table with your own hands: photo

A wooden garden table represents the aesthetics of the natural landscape of the dacha and the ease of manufacture. Photos and photos will help you make a garden table with your own hands. detailed instructions. Before you start making a garden table with your own hands, prepare everything necessary materials and tools. Be sure to look at the photo on how to make a garden table with your own hands: they show the production process.

It's very stylish and original table, which can be used both in the garden and in country interior. The costs are minimal, because it is based on a pallet of bricks.

You will need:

• brick pallet;
• swivel wheels approximately 10-12 cm in diameter;
• antiseptic stain for wood of the color you need;
• sandpaper;
• screwdriver;
• ordinary screws;
• screws for metal tiles;
• brushes

The procedure for making furniture and detailed instructions on how to make a garden table with your own hands.

Sand the tray well: first with coarse-grained sandpaper, then with fine-grained sandpaper. You can also use a grinder with a grinding wheel.

Attach swivel wheels to the bottom of the pallet. To do this, use ordinary screws, onto which put washers removed from the screws for metal tiles (since on the bases of the wheels large holes). You can directly fasten the wheels with screws for metal tiles, but then you will need a special attachment for a screwdriver.

Cover the table with an antiseptic wood stain, preferably containing wax. In this case, the table can be tinted to resemble walnut, rosewood, oak, pine, larch, or use a transparent antiseptic to only highlight the structure of the wood without changing its color.

Please note: not all pallets are the same! They come in different sizes and with different spacing between slats. Choose a pallet that suits you best.

Round garden tables made of wood and their photos

If you have an old round garden table, don't rush to throw it away! Of course, it has absolutely no view and is broken, but for your garden it is a real find. In its new guise it will decorate not only a relaxation corner in the garden, but also a country house.

Garden tables made of wood will go with many styles, as their decor is universal.

Look at the photo of garden tables with similar design options:

You will need:

• old wooden table;
• wood putty;
• old tiles various colors or tile break;
• white facade paint;
• tile adhesive;
• white grout for joints;
• priming;
• copper and gold contours for glass;
• putty knife;
• sponge.

Manufacturing procedure

Fill cracks and gouges and sand the table with fine-grit sandpaper, then prime everything except the tabletop. Paint the table with white paint (except the table top).

Wrap up tiles in a piece of drape or other dense soft fabric and break it with a hammer. Apply an even layer of tile adhesive on top of the tabletop and lay out the surface of the tabletop with tile fragments. Trim the edges with a trowel. When your mosaic has dried a little, wipe the surface with a sponge soaked in water to remove any traces of glue from the surface.

After the glue has completely dried, treat the seams between the pieces of tile with white grout.

Paint the sides of the table top with white paint, and then decorate them, as well as the legs of the table, with gold and copper glass outlines.

Plastic garden table

Typically, garden furniture is made of plastic, wood, rattan, presented in soft natural colors.

However, if a bright multi-colored “character” appears in the garden, especially one made of colored glass, then all attention is immediately drawn to it.

And it was made from an old broken flower stand, covers from metal barrel and regular round glass.

However, all these elements can be replaced with scraps of colored plastic.

So, let's look in more detail at how to make a plastic one. dining table with your own hands.

You will need:

• metal part from a flower stand;
• lid from a metal garden barrel;
• round glass with a diameter of 50-60 cm;
• a piece of rubber seal for windows;
• paper;
• pencil;
• copper circuit for glass;
• copper acrylic paint;
• white paint for rust;
• acrylic primer;
• means for obtaining patina;
• paints for glass painting.

Manufacturing procedure

On a piece of paper, draw a circular pattern in the Moroccan style. Then increase the pattern to the right size using a photocopier. Place the pattern under the glass and outline it with a copper outline. Dry the circuit thoroughly for the time recommended by the manufacturer (usually 8 to 24 hours).

Paint the interior parts of the ornament with bright stained glass paints. It is important that the paints you use are distributed evenly within the outlined area, so before you paint the tabletop, practice on a small piece of glass, identifying required quantity paints for fragments. Dry the finished painting well.

If desired, add additional decorative elements with a copper outline to the finished painting.

Paint the barrel lid with white rust paint. Now let's move on to the main part of the tabletop.

Prime the stand piece and paint it copper acrylic paint, then apply a patina product in some areas.

When the “foot” of the table is dry, glue small pieces of window seal onto the parts that will be in contact with the table top. This will allow her to hold on well.

Assemble the table: place the painted glass on the lid of the barrel, and place this “tabletop” on the foot.

DIY ideas for a garden and cottage using scrap materials: photos and descriptions

Further on this page you can see ideas for a summer house made from scrap materials and photos of the process of their implementation in practice. We necessarily accompany all ideas for a garden and dacha with your own hands with photos from different angles so that you can clearly see the whole creative process.

Folding garden table

Try making a universal folding garden table for your utility room. It looks beautiful and saves space. And most importantly, it is very convenient and will help you maintain a small utility unit in perfect order: everything is in sight and nothing gets lost.

You will need:

• a piece of edged pine board measuring approximately 60 X 20 cm;
• two ready-made wooden fastenings for shelf;
• light yellow façade paint;
• red acrylic paint;
• small glass jars with screw caps;
• screws;
• screwdriver or screwdriver.

Manufacturing procedure

Sand the board and paint it light yellow.

Decorate the ends of the board with a simple ornament using red paint.

Paint the lids of the jars with red paint.

Attach the jar lids to the board at regular intervals using small screws.

Hang the finished shelf on the wall of a utility room or workshop using ready-made fasteners (the covers should be on the underside of the shelf).

Fill the jars with screws, nails, small fasteners, staples, nuts and other small household items and screw the jars to the lids.

You can decorate jars with simple painting, applique and any other methods.

Interesting ideas for your dacha, home, garden and vegetable garden with your own hands with photos

And now we offer interesting ideas for a dacha and garden with your own hands in relation to other interior items necessary for the household.

This will be a comfortable seat on which you can relax after gardening. All our interesting ideas for a summer house and garden are accompanied by photos and can be implemented using various available materials.

Make a garden ottoman from old car tires. There are practically no costs, and the effect will exceed all expectations. This ottoman is not a simple one, but an ottoman-chest. You can store garden items in it. This will definitely not happen to anyone!

You will need:

• two old car tires one diameter;
• thick plywood;
• beautiful textiles of your choice;
• façade paint that matches your fabric in color;
• white spray facade paint;
• “liquid nails” or silicone sealant;
• construction stapler;
• jigsaw

Manufacturing procedure

Coat both tires with white spray paint and dry. Then paint both tires with light green paint, in a thicker layer, and dry.

Lay the tires one on top of the other, fastening them with liquid nails or silicone sealant. To do this, apply “dotted” small portions of any of the products in a circle on the surface of the lower tire.

Cut a circle out of plywood with a diameter slightly smaller than the diameter of the tire. Cover it with fabric and secure the fabric with a stapler.

Put covered with fabric circle on a base of tires. There you go! The seat is removable, so the inside of the ottoman can be used as a place to store small items.

The paint color of the tires and the color of the seat can be anything, depending on the style of your garden and the color of other garden furniture. In any case, the ottoman will look impressive

Garden furniture: tables and benches

Garden tables and benches are indispensable attributes of a cozy and comfortable country life, in which it is possible to enjoy privacy in a shady corner of the garden.

How garden furniture and tables are made, you could already fully learn from the examples published above. And now we propose to make an exclusive design of a garden bench with your own hands.

A garden bench is not just a necessary thing, but a very necessary one.

It’s so convenient to care for plantings and weed, not on your knees, but sitting on a bench, especially one as beautiful as this one. Even if it stands just like that, it is already garden decoration, no worse than any figure.

Add green paint to the pictures: add branches and leaves.

Add accents with gold paint: make painterly strokes on the drawings, emphasizing the lines and details.

When the bench is dry, cover it all, along with the glued pictures, with a clear or slightly tinted wood preservative.

If desired, the bench can be slightly tinted with blue-gray acrylic paint, creating the effect of old wood.

It is quite possible to make a wooden outdoor table for a summer house with your own hands. For this, ready-made or independently developed drawings are used. To do it yourself beautiful table made of wood for outdoor use, must be purchased quality material, and follow the manufacturing rules.

Buying an outdoor table made of wood for a summer residence: types and selection criteria

Beautiful and comfortable country table– an indispensable attribute summer holiday. When choosing a finished product, you need to decide on the dimensions, as well as with the following parameters:

• using a piece of furniture outdoors or indoors;
• maximum amount people who can sit at the table;
• budget allocated for acquisition.

The tabletop and body of an outdoor piece of furniture can be made of different types material:

• plastic models are ideal option for use in the country. The advantages are affordable cost, relative compactness and lightness. As a rule, they are produced in round or oval shape, and can accommodate approximately six to eight people. Despite the stylish appearance, they are not characterized by a very long service life. Disadvantages include the tendency to destruction as a result of the negative impact of direct sun rays. Also lightweight design can turn over in strong gusts of wind, the need to use the most flat surface for installation and susceptibility to damage, which is accompanied by a rapid loss of the original aesthetic appearance;

• wood models look very organic even in modern dacha landscape. Such pieces of furniture perfectly complement garden plantings. Such models belong to the category of quite expensive. The disadvantages of natural wood include the ability to collapse and warp under the influence of water and temperature changes, and the legs pressed into the soil can rot, which is why it is necessary to regularly treat with antiseptics;
• graceful metal models are distinguished by high quality and incredible durability. Such furniture looks especially beautiful against the background of forged fences and decorative elements. Such tables are distinguished by considerable weight and also very high cost. Often modern models are very a good combination metal with wood or glass countertops.

If you plan to use the table in a summer cottage all year round, then the best option there will be a metal structure that is very resistant to any adverse external factors. Legs metal structure They can even be concreted, which will provide additional stability to the piece of furniture.

How to make a wooden table for your garden with your own hands

Tables from wooden planks very often made independently. Of course, this option will require sufficient care throughout the entire period of operation, but it will give local area the dacha has a bright style and originality. Among other things, you can build the simplest models with your own hands with little time and money, even in the absence of professional skills and special tool.

Making a drawing of a table with dimensions

Scheme self-assembly may already be ready, but in order to get an original table with the most suitable dimensions and shape of the tabletop, you need to complete the drawing yourself. When drawing up a drawing, it is recommended to focus on standard dimensions such an item is 178x95x77.5 cm.

Required tools and materials

To make beautiful and practical table made of wood for a summer residence, need to prepare:

• roulette;
• pencil;
• saw;
• drill or screwdriver;
• building level.

Work must be carried out using standard safety glasses and gloves. During production you need to use building materials presented:

• a pair of boards with dimensions 85x10x2.5 cm;
• a pair of boards with dimensions 153x10x2.5 cm
• four boards with dimensions 168x10x2.5 cm;
• four boards with dimensions 75x10x5 cm;
• board 95x10x2.5 cm - 17 pcs;
• fastening tools in the form of nails, screws and bolts;
• glue for woodworking.

It is also necessary to purchase in advance antiseptic compounds for wood processing, wood varnish or special paint and brushes.

How to make a table with your own hands (video)

Let's get started: making parts for a wooden outdoor table

All elements in the form of wooden boards must be smooth, natural humidity, made from quality hardwood. If necessary, before assembly, the boards must be leveled and, if necessary, sanded. To obtain durable design, the wood should be thoroughly treated with antiseptics.

It is not recommended to impregnate wood oil compositions , which have proven themselves very well when used in conditions of high humidity, but increase the level of flammability and give the structure an unpleasant and fairly persistent odor that lasts for a long time. After applying water-soluble impregnations, it is recommended to always apply a layer of a special glazing antiseptic, which allows you to give high decorative properties product and contributing additional protection.

Assembly and fastening of main elements

At the first stage of self-production of a wooden outdoor country table, the frame base of the piece of furniture is assembled. It is to the frame base that the boards will subsequently be fixed to create a tabletop and table legs. The frame base traditionally consists of four planed and smooth longitudinal boards measuring 168x10x2.5 cm and a pair of end boards measuring 85x10x2.5 cm.

Assembly must be carried out on the most flat surface possible, securing the end elements to the longitudinal boards using galvanized screws and adhesive. Very important prevent warping of the base during assembly and fastening. After checking diagonally, they must be fixed additional boards 153x10x2.5 cm, which will give the assembled structure additional rigidity, and will also hide the areas where the legs are attached.

The tabletop is assembled from boards measuring 95x10x2.5 cm. The boards can be fixed using either galvanized nails or self-tapping screws. Be sure to leave a gap of 0.5 cm between the tabletop elements. The legs are attached using self-tapping screws or bolted connections. The second option is more preferable and allows you to get removable model, convenient for transportation and storage.

Installing amplifiers is a guarantee of table durability

If there is a need to obtain the most massive and durable structure, then amplifiers are used. To install such parts, you need to turn the product upside down. The transverse reinforcements in the middle of the tabletop are nailed, and the corners of the amplifiers are sawed off to save space. Pair of amplifiers with notched neckline, which follows the shape of the crossbars of the tabletop, is nailed to the sidewalls.

How to protect your table from external factors

Adverse weather conditions, represented by sun, rain and temperature changes, are aggressive environment For wooden structure, used in outdoor conditions. To protect wooden products and extend their service life, special film coatings and various impregnating compounds are used. Most often used protective films based on polyurethane. The disadvantage of such a film coating is the loss of appearance, decreased efficiency and wear after a certain time. Wood protection impregnations are presented as a mixture based on oils and repellent solutions. Both options for protection from external adverse factors have proven themselves well, but require periodic updating.

Wooden outdoor table: drawing (video)

We make a wooden country table from what is at hand

A variety of available materials are often used as materials for creating a wooden country table. Incredibly stylish and very reliable tables made from slabs are an option that you can make yourself if you have some skills in working with wood. In this case, you need to be prepared for the fact that the technology for manufacturing countertops based on saw cuts has its own specific characteristics and is quite labor-intensive, but the result obtained ready product will be unique and inimitable.

Very original in garden design designs look like:

• from wooden beam for true fans of natural materials;
• from several stumps or bobbins;
• from old window frames with glass table top;
• from boxes supplemented with various decorative elements;
• from an old wooden chest with forged elements.

Enough wide use We also received tables made from pallets. The fashion for such products came from Asia, where such furniture items are often made for lack of available funds. When creating such an option, you can show all your imagination, but it is highly advisable to replace nails from pallets with self-tapping screws, and all fastenings of the frame and boards must be reinforced with special furniture corners. If desired, you can supplement the design with ordinary furniture wheels, allowing you to make the table mobile and easy to use.

How to make a metal table with a wooden top

One of the interesting and durable options for garden furniture. For self-production you will need:

• metal profile pipe or high-quality rolled metal of sufficient cross-section;
• primer for working with metal surfaces;
• paint by metal surface and brushes;
• chalk or light marker;
• flat surface for stencil;
• wooden table top;
• bars and adhesive to secure the tabletop.

The tool can be presented welding machine, grinder, metal saw, hammer, screwdriver, screws and bolts. The metal is first cleaned of rust and dirt using a steel brush, after which a frame is created in accordance with the stencil.

Welding must be done carefully to avoid the formation of welding build-up. The entire structure is cleaned with a wire brush, after which it is primed and painted. After the paint has completely dried, the tabletop is fixed, which also needs to be treated with special antiseptics, and then varnished or painted.

DIY log table (video)

Self-production country furniture made of wood is a very interesting and creative process, accessible even to beginners. Such natural material goes well with metal, glass, and plastic, which allows you to create original, unusual and very decorative solutions with your own hands.