Watch slime at home. How to make slime at home in different colors, instructions on how to make slime from different materials. This is the best option for making slime

Slime is a stretchy, spreading toy that can take any shape, stretch and smoothly flow from one hand to another. This kind of thing is sold in children's toy stores, but you can make it yourself. In this article we will tell you how to make slime using PVA glue in combination with other ingredients. The most popular ingredients for slime in combination with PVA glue are shampoo, soda and toothpaste. Making these fun toys at home is profitable and exciting. You can adjust the color, elasticity, transparency and make it an exclusive item.

History of the origin of lizuns

The initial interest in this toy appeared in the 1990s, when the animated series “Ghostbusters” was released on television boxes. The first hero was the green slime ghost.

In general, this toy was made back in 1976 under the leadership of Mattel. The composition included the components guar copper, minerals, borax, which make the toy slimy and stretchy. But a substitute for all these chemical elements has appeared - PVA glue. This is exactly what we will use.

How to make slime from PVA glue and shampoo

There are a lot of recipes for making this toy. Let's take the most popular one. Based on the recipe, in order to make slime with your own hands, you only need three components:

shampoo;
PVA glue;
food coloring or gouache;

These components need to be mixed in a ratio of 3 to 1. Three parts - glue and one part - shampoo. To make the slime made from PVA glue and shampoo rich, you can add a pinch of bright dye.

What glue should I use for slime? It is advisable to choose a transparent one, and among them Titanium is popular, since it contains all the necessary properties to impart softness and elasticity.

It is worth considering that elasticity depends on the amount of glue, that is, how more glue, the more resilient it is.

How to make slime from PVA glue and toothpaste

There is also a slime recipe made from PVA glue and toothpaste. It requires only two components:

PVA glue;
toothpaste.

Mix half a pack of toothpaste with one tablespoon of glue until smooth. Glue must be added if the toy has not reached the proper consistency. Place in the refrigerator for 15 minutes. The toy is ready for use.

Don't let the smell of toothpaste scare you, it will disappear soon.

The toy actually turns out to be 2 in 1, since when cold it can be used as an anti-stress toy, to lift your spirits, and when room temperature for its intended purpose, like a slime.

There is another recipe using toothpaste, but without using glue. The paste should be placed in the microwave for 2 minutes, then taken out, stirred and returned to the microwave. We repeat this procedure three times. After cooling, apply sunflower or body butter to your hands, knead the mass for 2-3 minutes and you’re done.

How to make slime from PVA glue and soda

There is a wide variety of recipes using two main components, PVA glue and soda, and we will look at the two most popular ones.

First recipe

So, in the first case, you will need:

PVA glue;
baking soda.

Pour the glue into the container, give it color by adding dye. Pour 30 g of soda into another container and fill it with a glass hot water. When the water and soda have cooled, pour this solution into the glue. Then we collect it from this liquid so that it does not stick to our hands, and additionally dip it into the solution. After this, the slime made from soda and PVA glue is ready for use.

Second recipe

For the second recipe you need:

“miracle clay” (with foam);
PVA glue;
baking soda.

Pour hot water into the “miracle clay”, mix, separate the liquid from the foam balls. After that, add glue there and mix.

The glue needs to be poured along the walls of the container so that there are no bubbles in the slime.

In the second container, combine soda with hot water, cool. Then combine the two containers and mix for about 1-2 minutes.

Divide the mixture into containers, color in different colors. Leave the containers open for 15-20 minutes and then you can enjoy the clear colored slimes.

During mass production, slime (or handgam) is injected with some chemical components, not always harmless for children. Caring parents can make slime without glue and without sodium tetraborate from available ingredients and delight their child with a bright, interesting toy. Making handgams takes a little time; anyone can cope with the task.

It is convenient to prepare slime in a tall bowl. This promotes uniform and quick kneading of the toy.

Child psychologists believe that slime is a good anti-stress toy. Handgam does not contain glue, helps develop motor activity, interest in plastic forms, fine motor skills, creative imagination. To make slime at home without glue and sodium tetraborate, you can use different components. Toothpaste, potato starch, wheat flour, hair shampoo, baking soda, liquid soap, and children's plasticine will be useful. Everyone has these ingredients, so you can make slime at home without sodium tetraborate, without using glue, quickly, inexpensively, and the resulting slime will not contain harmful ingredients.

Airy slime made from soap and paste

You will need one and a half tablespoons (25 g) of toothpaste: you need to visually divide the tube into required quantity parts. Take in equal quantity liquid soap, add five teaspoons wheat flour. How to form a slime with your own hands without using glue and borax:

To the bottom metal utensils squeeze out the required amount of paste, pour soap.
Mix the liquid base, pour flour into the resulting mixture little by little.
It is convenient to first stir with a spoon, and when the mass becomes thick, use your hands.

At the end of the work, the slime is lightly moistened with water and kneaded. From simple ingredients You can make slime without PVA glue and sodium tetraborate in a couple of minutes. The resulting toy is in no way inferior to store-bought plasticine handgams.

Viscous toy made from soda and detergent

A quick and easy way to make a fun toy is to use dishwashing liquid, regular soda with added food coloring to give the toy beautiful colour. Preparation of slime:

Take some dishwashing liquid and pour it into a container.
Add soda a pinch at a time, dilute the thick mixture with water.
Add two to five drops of food coloring of the desired color.
The mass is stirred until a homogeneous substance is added, water is added.

Depending on the ingredients included in the recipe, the slime results in different textures and degrees of transparency.

By this recipe There is no exact indication of how much detergent to add, since they differ in consistency, foaming, and viscosity. After several attempts, you will get a toy that retains its shape well, does not melt in your hands, does not tear into pieces and does not contain glue. If the mixture is thin, add half a teaspoon of soda, and to reduce the thickness, add dishwashing detergent.

Gelatin-plasticine slime

Every family with children has plasticine. It can be used for instant cooking slime toys. To make the slime pliable and elastic, add food gelatin. Handgam making process:

Take 15 grams of gelatin, pour one glass of cool water - preparation in a small metal container.
After the product swells, place the dishes on the stove, bring to a boil over low heat, and remove.
Five to six bars of plasticine (100 g) are kneaded, heating the substance, placed in a container, 3 tbsp are added. water, mix with a plastic spatula.
The prepared mass of plasticine and water is combined with gelatin, mixed until smooth, and cooled for half an hour in the refrigerator.

Made without sodium tetraborate and PVA glue, the toy acquires a viscous jelly-like consistency, holds its shape well, and has the required plasticity and elasticity. It is recommended to ensure that children, when playing with handgam, do not stick it to the wallpaper, so that stains do not remain on them. According to recipes, instead of detergent, you can use hair shampoo, shower or laundry gel.

To get a real space slime, pearlescent dyes and glitter are added to the mixture.

Recipes containing sodium tetraborate and glue

The attractiveness of homemade slime preparation methods is their accessibility. component composition. The necessary ingredients are available in every home, and the missing substances can be purchased cheaply at a pharmacy, hardware store, office supply department, etc. household chemicals. Simple recipes will help you make slime from sodium tetraborate and PVA glue, stationery or universal.

Laundry soap with boric acid

To prepare slime you need a quarter of a bar of soap, 50 ml of hot water, stationery silicate glue, a teaspoon of boric acid:

Cut laundry soap into thin sheets and fill with water.
Add a teaspoon of boric acid solution to the mixture and mix.
Add stationery glue to the composition in small portions, stirring.

Mix the finished mixture thoroughly until the glue thickens, knead it well with your hands - the slime is ready. It is recommended to use protective gloves.

Starch-adhesive composition

Methods for making slime often involve the use of glue. When interacting with other components, the substance quickly hardens, but at the same time the toy retains its ductility and plasticity. How to quickly make slime from starch, hydrogen peroxide, PVA glue:

Combine water (1 cup) and 100 grams of potato starch.
Knead until a jelly mass is obtained, add a glass of glue.
To make the mixture bright and colorful, food coloring is added, and a little hydrogen peroxide is added to make it soft and airy.

A slime recipe made from pencil glue with borax hardener also gives good result. The glue is released from the packaging using the cores of four glue sticks, heated in a glass container to a viscous consistency (a microwave or oven is suitable), and a little dye is added. After this, a teaspoon of borax is diluted with a small amount of water and gradually introduced into the glue until the composition thickens. All that remains is to knead the mass well, it will turn out interesting toy for children.

Parents can use prepared slime to develop their child’s motor skills: pour small balls into the mixture or hide small toys

Common manufacturing option

Of all the methods listed, the fastest way to make a slime is from PVA glue and tetraborate. As a coloring component you can use brilliant green, gouache, acrylic paints, food colorings. How to make a large handgam from glue:

Take a container made of any material - plastic, metal, glass.
Pour PVA glue into the selected container - a 100-gram package.
Add green, blue, red, purple dye.
Do not pour in a large number of sodium tetraborate, add gradually.
Stir the mixture until thickened, transfer to a plastic bag.
Mash the mixture well in the bag, take out the mixture and knead thoroughly.

The consistency of the finished glue slime should be spreadable, elastic, the slime stretches easily, quickly takes its original shape, and sticks to the surface. You need to understand that the basis of the popular toy is gel, toothpaste, detergent, glue, soap, shampoo, plasticine. To harden the mass, use a recipe with the addition of borax and soda, starch and flour. The ingredient should be introduced gradually and mixed well. A mixture that is too thick will tear into pieces, while a liquid mixture will spread over the surface and stick to your hands.

According to reviews, not everyone is able to make slime from glue and borax and other components on the first try. Since the components of the popular toy are always at hand and are inexpensive, you can practice making slime at home - you will definitely succeed in handgaming. Some useful tips will help:

In order for the slime to retain its properties longer, you need to store the toy in a cool place, using a bag or jar with a lid.
You should play with slime on a smooth, clean surface, otherwise it will quickly become dehydrated and “collect garbage.”
If the composition contains chemical components (glue, borax, chemicals), after playing, children need to wash their hands thoroughly and do not let them taste the slime.
To make the slime glow unusually in the dark, add fluorescent paint, PVA glue can be replaced with silicate glue, or use polyvinyl alcohol.
The toy is intended for games and children's creativity, but has practical use– perfectly collects dust between the keyboard buttons.
To remove bad smell glue, cosmetic oil, flavoring, and extract are added to the slime.

Slime can perform completely non-childish functions. Cleaning dust in hard to reach places- the dignity of a slime

If the glue slime sticks to your hands and does not stretch, there is not enough liquid, you need to add glycerin, water, liquid starch. When the toy stretches well, but has too elastic a consistency, the slime does not stick to the surface, add a binder.

Making slime at home is an interesting creative process that you can involve children in. Every child will love watching a fun toy appear before their eyes. But the process of preparing handgam should be supervised by adults.

Lizun is a kind of chewing gum for hands (hand gum), which is now experiencing the second peak of its popularity. This toy has the ability to take any shape, it can be twisted and crushed, tossed and deformed, glued to different surfaces and effortlessly peel them off, you can even glue some parts together (only for a short while) with its help.

Slime has the consistency of jelly, but it is not able to melt. The toy helps in the development of fine motor skills, stress relief and calming. nervous system generally.

You can buy handgams at a toy store, appearance all models are almost the same. However, their quality can vary quite a bit. Often, cheap Chinese slimes are made from low-quality, and sometimes outright harmful substances. That is why parents who care about the safety of their children most often create such toys themselves. Moreover, the ingredients necessary for this can be found in every home.

How to make slime from liquid silicate glue

Silicate glue is a common material from which most handgams are made. Make slime with my own hands you can do this:

mix in a separate container one part of glue (silicate or office glue, for example, PVA) and one part of medical alcohol;
add a little coloring to this consistency (food coloring is suitable for this purpose, which is absolutely safe for children’s hands);
after all the ingredients are mixed, you need to keep this mixture under running water ice water, waiting for the slime to harden.

This method of creating sticky toys does not require a lot of materials and time, but it is used quite rarely due to the fact that the recipe uses alcohol.

How to make “glass” or transparent slime

You can create a glass slime that is absolutely transparent without special effort. To do this, you need to prepare sodium tetraborate (the well-known borax) and ordinary liquid transparent glue (silicate).

The process of creating a transparent handgam looks like this:

in a glass container, mix one part of glue and sodium tetraborate;
mix the composition thoroughly using a plastic spatula;
After a minute, the glass slime will be ready.

Making slime from water

Making a slime “like in a store” is quite easy; all you need is PVA glue (office glue), water and a little time.

Technology for creating water slime:

pour 50 ml of slightly warm water into a glass bowl clean water and 100 gr. PVA glue (it is important that its expiration date does not expire);
the mixture must be thoroughly stirred; if it turns out to be runny, you need to add a certain amount of glue;
now you need to pour 1 bottle of sodium tetraborate (4% solution) into this composition;
if you purchased borax, which is in a powdery state, it must be diluted with water (in the proportion of 1 tablespoon per 0.5 cup of water);
it is important to monitor the amount of borax and not to exceed its amount, otherwise the slime will be too hard and less flexible;
in conclusion, any dye must be added to the composition; it can be either food-grade or a regular solution of brilliant green.

Upon completion of the process of creating slime, it must be placed in plastic bag and knead thoroughly. Important! After playing with such handgams, you must wash your hands.

How to make slime from soda

Some believe that tetraborate is not needed in children's toys, and have resorted to creating borax-free slimes. It is an excellent substitute for ordinary baking soda. Moreover, from soda you can make both a beautiful transparent slime and a multi-colored slime (if you add dye).

Creating such a handgam is simple:

first you need to dilute 100 ml of glue in 50 ml of water;
using a wooden stick, add a little coloring matter into this liquid;
the composition must be stirred until all ingredients are completely dissolved and combined;
Now you need to mix 150 grams. soda and 15 ml of water;
add this mixture to the color composition;
Now you need to transfer the mass into a plastic bag, shake and knead thoroughly - from these manipulations the slime will gradually thicken and become elastic.

Just a minute of exposure and your own handgam is ready! Note! This slime should only be stored in a closed jar or bag, otherwise it will dry out and lose its elasticity.

Making slime from plasticine

It’s very easy to create homemade slime from plasticine, which is found in every child’s room.

It is prepared like this:

The process of making handgams is quite dynamic, so you need to prepare all the necessary ingredients in advance: plasticine (a strip from a standard set or 100 grams); food gelatin – 15–20 g; glass of water; container - glass or plastic for mixing all parts and metal for heating gelatin; spatula for stirring the slime.
Gelatin should be filled with water in a metal bowl and allowed to swell for 1 hour.
Now you need to heat the swollen gelatin over low heat, without bringing it to a boil.
Separately, knead the plasticine until it becomes very soft and absorbs body heat.
In a plastic bowl, pour 50 ml of hot water into the mashed plasticine and mix this mixture thoroughly with a spatula.
Now all that remains is to thoroughly mix the slightly cooled gelatin and plasticine mixed with water.
Finally, the slime should be put in the refrigerator and left there for half an hour, after which you can play with it.

How to make slime from shampoo

A very interesting recipe for making slime involves using shampoo, which is sure to be found in every apartment. There are several options for creating such a handgam:

Mix equal amounts of hair shampoo, soda and water in a plastic container. You can add any dye or leave the slime snow-white. It should be stored in a plastic bag.
You can combine shampoo and water with flour to get a thicker toy consistency. Important: mix the mixture in warm water and add the dye before the flour.
Often, starch is used instead of flour, which allows you to sculpt beautiful sticky crocodiles or create your own dolphin.

Note! Slimes that contain flour turn out to be quite sticky and have an unpleasant ability to leave greasy spots on light wallpaper, which are not easy to wash.

How to make slime from liquid laundry detergent

Young inventors came up with the idea of using liquid laundry detergent to make slime. Moreover, ordinary washing powder or dishwashing liquid, in this case they will not have the desired effect, and it is unlikely that you will get a high-quality slime.

To create such a handgam you need:

mix ¼ part of a standard tube of PVA glue with food coloring in a container;
achieve uniform consistency and color by thoroughly mixing;
add no more than 2 tbsp to this composition. l. liquid laundry detergent;
stir the resulting mixture;
if the composition is very thick, you need to slowly, literally drop by drop, add liquid washing powder to it until it reaches the desired consistency;
now you need to carefully knead the entire composition for 5–10 minutes (it is better to wear rubber gloves);
The finished slime is stored only in a container that is hermetically sealed.

If some of its properties are lost over time, you can put the handgam in the refrigerator for a while.

How to make magnetic slime with your own hands

It is very interesting to play with slime, which tends to be attracted to a magnet. To do this you need to do the following:

Mix a glass of water and half a teaspoon each of borax and glycerin in a bowl until smooth.
Separately, you need to mix 150 ml of water and 30 g. glue, gradually adding a small amount of dye to them. You can make your handgam glow; to do this, at this stage you need to add a small amount of phosphorus paint to it.
Now you need to mix both mixtures, gradually adding one to the other. It is important to carry out this process slowly; as soon as the desired density of the composition is achieved, tetraborate will no longer need to be poured.
Afterwards, you need to carefully roll out a layer of slime on a flat surface and pour a certain amount of iron oxide into the middle.
Now the composition is kneaded again until a uniform shade is obtained.

Method for making slime from flour

Slime containing flour is considered quite safe for children. However, in any case, you need to supervise children's games, because even the safest composition can cause choking.

You can make slime from flour like this:

sift 2 cups of flour through a sieve;
add ¼ part ice water to flour;
now pour ¼ of the hot water into the container;
the mixture must be mixed well, allowing the flour to glue everything together so that there is not a single lump in it;
finally, pour in a little food coloring and stir the mixture again;
Finally, the slime is left in the refrigerator for 2 hours until it cools completely.

Nail polish slime

Very interesting Velcro is made from nail polish; preparing them is not too difficult:

Pour any nail polish into a glass container.
Add a little vegetable oil to it, mix everything thoroughly and for a long time.
Now, using rubber gloves, you need to remove the dye from the container, which, thanks to the oil, has accumulated in the middle. You need to gently knead it with your hands.
Lizun is ready. You can put it in the refrigerator for half an hour to increase elasticity.

The main disadvantage of this handgam is the unpleasant smell of acetone, which is inherent in every nail polish. Therefore, it is unlikely to be suitable for small children to play with.

How to make edible slime from Nutella

Every child will definitely enjoy this toy. It can be made quickly and easily. To do this you need:

melt 100 gr. in a water bath. marshmallows or chewing marshmallows;
the melted mass will be sticky and viscous;
Now you need to add Nutella chocolate spread to this mass, it is better to do this gradually, in small portions;
when the composition is slightly mixed, you need to pick it up and knead it for 5 minutes, achieving uniformity in color and consistency.

You can play with this slime a little, and then, with no less pleasure, enjoy it with tea.

How to wash slime

This toy is quite sticky in consistency, so it is not surprising that everything, including dirt, quickly sticks to it. Playing with such a handgam becomes simply unpleasant and uninteresting, because once it collects garbage, it simply stops sticking and stretching well. This problem can be corrected by washing the Velcro; in addition, you need to clean it properly:

You can rinse it in a container of water and put it in a closed bowl in the refrigerator for a while.
Often a syringe is used, into which you need to draw the slime and slowly squeeze it out. All debris, at the same time, collects in the nose of the syringe.

A handmade handmade item becomes truly dear to a child, and keeping it safe becomes a top priority. In order for the toy to please your baby for as long as possible, you need to adhere to the following rules:

Store slime only in closed containers or tetra bags to prevent it from drying out and getting in dust.
You should not use soap to wash the toy.
Handgams should not be left near heating devices(batteries, solar window sills).
A child should not leave a toy on surfaces that have pile (carpets, rugs, fur), otherwise he will certainly collect its particles on himself.
If the slime no longer stretches well, you can add a few drops of vinegar or a little glycerin to it.

Slime is a universal toy that can be easily made with your own hands at home. It will allow the child not only to have a great time, but also to develop fine motor skills, which is very important for a growing person.

Hi all! In this article I will write several ways on how you can make the famous and beloved slime at home. This toy was very popular in my childhood, because it was in the 90s that the cartoon and film “Ghostbusters” were shown. In this cartoon there was a ghost Lizun, who became the prototype of the famous toy. She could stick to the wall, table, and quickly change her shape.

You can also make a similar toy yourself. This is a fun activity for kids (they love all kinds of experiences) and adults will enjoy the creation process too. So, I am writing some of the best ways.

I used this recipe to make slime with my daughter yesterday. The process is very fast, takes a couple of minutes. First you need to stock up on the necessary ingredients. This recipe produces a substance similar to “ smart plasticine" For it you will need:

PVA glue – 100 ml
solution of 4% sodium tetraborate (boron) - a few drops
food coloring (or brilliant green, or gouache)
plastic container
wooden stick (pencil or spatula)

These proportions make a fairly large slime. If you need a small one, reduce the quantity. You can make several slimes different colors, it will be much more interesting for children.

I made it in a gouache jar. You can use any plastic jar or container. First, pour PVA glue, add any dye you have to it. I used food coloring orange(I still have it from Easter). You can also paint with brilliant green or gouache. Mix the glue and paint thoroughly with a pencil until the color is uniform.

Then pour in sodium tetraborate and mix well. If there is not enough tetraborate, add it little by little. The glue should become thick. The mass will begin to peel off from the pencil and jar. After this, you can take it with your hands and knead it. It relieves stress well in adults; it slowly spreads into a small smooth puddle on the table.

The only thing I didn’t like was that this slime (or smart plasticine, slime or handgam, which translates as chewing gum for hands) paints your hands and the table. I think it will be better with gouache. It also doesn't have a very pleasant glue smell. If desired, you can add flavorings to it, if you have any in the house.

The price of such a slime is low. I bought the glue for 35 rubles, sodium tetraborate is sold at any pharmacy without a prescription for 19 rubles, the dye cost me 5 rubles. Total - 59 rub. But I used about a sixth of the jar of glue for one slime, less than a third of tetraborate.

It is important that the glue is fresh, homogeneous, without water. You won't succeed with bad glue. You need to store the mixture in a closed jar so that it does not dry out.

Here's what I got (video):

Slime without sodium tetraborate

You can make a slime very similar to the previous one, only use liquid washing powder instead of sodium tetraborate. It is washing powder in gel, not fabric softener and other gels.

Take a look at the creation process:

Making slime from plasticine and gelatin

This method is popular and has good feedback. They write that it makes good slime. But such a toy is short-lived. Suitable for young children to develop fine motor skills. You will need:

plasticine (color optional) - 50 g.
gelatin - 25 gr.
warm water - 30 ml
plastic container for mixing ingredients
a metal container for heating gelatin (can be in plastic or ceramic if you use a microwave)
wooden stirring stick

First, pour gelatin into a metal container. cold water so that the water covers it. Leave for 20 minutes for the powder to swell. After this, you need to heat the mass so that it completely dissolves. This can be done in a water bath or in the microwave. In the second case, heat the gelatin for about 2 minutes.

Pour plasticine into a plastic container warm water, mix wooden stick until smooth. Add the cooled gelatin to the plasticine and mix everything thoroughly again. Then you put our slime in the refrigerator to harden. When it hardens, it’s ready! The finished toy should also be stored in the refrigerator in a closed container.

How to make slime from starch and PVA glue

This is also a simple method, like the first and second. The difference is that liquid starch (rather than boron or liquid powder) is used as a thickener. Required components:

PVA glue - 100 ml.
liquid starch (this is not food starch, but chemical agent for washing). You can take food, but the result will be worse. If you take food starch, you will need to mix it with water - 140 ml
dye (green paint, gouache, food coloring)
plastic bag

They write that according to this recipe the slime will turn out just like in the store. To make this slime, you need to pour starch into a small bag, add paint and glue.

Mix everything thoroughly with your hands until smooth through polyethylene. After this, the mass should be given time to freeze in the refrigerator (about 3 hours). That's it, the toy is ready, you can play!

If after mixing there remains excess liquid, it needs to be drained.

Other slime options at home

There are many more various options. But they do not guarantee a good result. Most of those who have tried other recipes write that nothing worked. For example, they make slime using baking soda. Only in this case a very hard substance is obtained, which cannot in any way be called slime, handgam, etc. There is no way to crush it. So it's better not to waste your time making such a creature.

There is also a way to make slime from shampoo and Titan glue. But slime using this method will most likely not work either. It will spread and stick to your hands.

There is also a way to make a toy using polyvinyl alcohol instead of glue. But this method is quite troublesome. First, you need to find this very alcohol in powder and dilute it correctly with water. And then cook for a full 35 minutes. I think not everyone will want to bother so much when there are more accessible and faster ways.

In some sources I found a recipe for making slime from flour, water and dye. But every person knows that when you mix flour with water, you get dough. You can sculpt with this dough, it is safe for babies, good for fine motor skills, but it is not slime. I make this colored play dough for my kids because it's softer than play dough.

Store the slime in a closed jar with a tight lid. Otherwise it will dry out.
Do not store the toy in warm places. Moreover, do not place it on a battery or in the sun.
Do not place the handgam on a fleecy surface. Because of this, hairs will stick to it and it will lose its structure and smoothness.
You can add flavorings or essential oils to eliminate the smell of glue and other components.
You can experiment with the composition of the mixture. You can add two drops of vinegar to the paint mixture - the slime will stick better. If you add a little hydrogen peroxide, the mass will turn out more airy and not sticky. If you add glycerin, the “pulver” will become slippery.

If you know others good ways How to make more slime at home, write in the comments! And share the article with your friends on social media. networks. See you!

The Lizun toy became popular after the release of the feature film “Ghostbusters”. It got its name thanks to one of the characters in the film, a ghost whom the hunters nicknamed Lizun.

Scene from the movie "Ghostbusters" 1989. on the left is Slime, thanks to which the Slime toy became popular among children

The toy quickly gained popularity among children around the world, as a result of which it began to be released in industrial scale. It can be purchased at the store, but it will be more interesting for children if parents and they make a Lizun with their own hands, which can take on various shapes, spread, and stretch.

There are many ways to make your own toy from various materials. In this article we will look at several common and available methods, thanks to which you can give a certain color to the toy and density.

Below are the top 9 ways to make slime at home. And before you start reading, look video from YouTube, which have the most views. We found them like this:

Video 1. 3 slimes from two ingredients

Video 2. Toothpaste slime without glue

Now, let's try to make this with our own hands funny toy. Choose the method that is convenient for you:

How to make slime without glue

If you do not want your child to have a toy that contains glue, then it can be made from other materials.

For example, you can use plasticine. IN in this case the mass can be given any shape that is preserved. To do this you need to prepare:

Plasticine.
Gelatin.

In a metal bowl, dilute edible gelatin in water according to the instructions on the package. Set aside for 1-2 hours. Then the bowl should be placed on the stove and after the mixture boils, remove from the heat.

Knead 100 g of plasticine in your hands until it becomes warm, and mix it in a separate bowl with 50 ml of water, stir and add gelatin. Mix all ingredients thoroughly until a homogeneous mass is formed and place the slime in the refrigerator. After a couple of hours, you can give the children a toy.

How to make slime from PVA glue

Most often, slime is made from PVA glue. There are many ways using various ingredients, we will look at one of them. For this we need:

200 ml warm water.
1-2 bottles of white PVA glue.
Food coloring.
2 bottles of borax (salt of weak boric acid).

Before you start working, you need to shake the bottle of glue and then pour it into a deep container. A regular one will do for this. glass jar. In a separate bowl, stir the dye in water and pour it into a jar of glue. Mix all ingredients until smooth.

Then boric acid must be gradually added to the glue mixture. As a result, the mixture will begin to acquire a viscous and dense consistency. When the required ductility and density of the mass is achieved, it must be thoroughly kneaded using rubber gloves or in a plastic bag. Leave the finished slime on the paper for about 30-60 minutes, after which you can give it to the children.

DIY slime made from shampoo and soda

Let's consider another option for making slime with your own hands. In this case we will use shampoo, so the child must play in the presence of adults. They need to make sure that he does not lick his hands, and after playing, wash them thoroughly with soap. We need to prepare the following ingredients:

Shampoo.
Baking soda.
Water.
Natural or food coloring.

There is no exact dosage, so you need to gradually add all the ingredients to achieve the required consistency of the mass. First, in any container you need to mix shampoo with water and dye. Then add soda and stir again.

If there is too much soda, you will need to add a little more water. Therefore, see for yourself what may be missing for the required density of the future toy.

The slime may not work out the first time, but a little practice and you will be able to determine it by eye. required amount ingredients.

How to make slime without sodium tetraborate and without PVA glue

The store-bought toy contains chemical elements which may harm the child's health. Therefore, it is recommended to make the toy yourself without glue and sodium tetraborate. If you want to do absolutely safe slime, then you can use flour. To do this we will need to prepare the following ingredients:

Dye.
Cold and hot water.
Flour.

You need to sift 2 cups of flour into a small bucket, add about 60-70 ml cold water, after which, in the same amount of hot water, but do not use boiling water, as the toy will not work. Now mix everything thoroughly until smooth. There should be no lumps left in the mixture.

At the next stage, add a small amount of natural or food coloring. The mixture must be mixed well. After this it should become sticky. Place the mixture in the refrigerator for 3-4 hours. After this time, the child can enjoy the new toy.

Toothpaste slime

You can make slime from regular toothpaste. There are many recipes, but we will look at two methods.

No. 1 in a water bath

Squeeze the amount of any toothpaste into a bowl.
Place a frying pan with water on the stove and wait for the liquid to boil.
Place the bowl of pasta in a water bath.
Cook for 15 minutes, while toothpaste it is necessary to constantly stir.
As a result, you should get a dry, non-flowing mass. Leave it until it cools completely.
Grease your hands vegetable oil and knead the slime for several minutes.
After such procedures, the slime should stretch well, become elastic, but not tear.

The whole process took about 20 minutes.

No. 2 in the microwave

Place the bowl of toothpaste in the microwave for about 2 minutes.
Remove the plate, mix thoroughly, and return to the microwave for 3 minutes.
The result should be a dry and wrinkled mass.
Apply cosmetic oil to the slime and knead thoroughly.

If necessary, you can add sparkles to the mixture, which girls will really like.

Simple slime made from water

There is a very simple way to make a toy. It does not contain any toxic or chemical substances. In order to make slime you need to prepare:

200 ml water.
200 g starch.

You need to mix the ingredients in equal proportions. To do this, it is recommended to use a regular glass. Mix the mixture thoroughly and, if necessary, add one or another ingredient to achieve the required consistency. Mash well and the slime is ready.

Of course, such a toy is significantly different from its store-bought counterpart, but it is absolutely safe. If necessary, you can add a little food coloring to achieve the desired color.

Shaving foam slime

Let's consider another option. The base of the toy will be regular shaving foam. To make elastic slime, you need to prepare the following ingredients:

Shaving foam.
Borax.
PVA glue.
Dye.
Water.

Now let's start making:

Mix in a bowl warm water(50 ml) with borax (1.5 tsp).
Stir thoroughly until the crystals are completely dissolved.
In a separate bowl, mix the glue and shaving foam well.
Add 2 tsp of the prepared borax solution.
Mash the mass with a spatula. The result should be a sticky lump.
Then add a small amount of borax again.
Stir the mixture until it comes away from the sides of the dish.
Mash it a little in your hands and the slime is ready.

To add color to the toy, you can add a small amount of food coloring.

DIY slime without starch

Now let's try to make a toy in the most popular way. This slime is practically no different from its store-bought counterpart. To do it, we will need:

100 g PVA. It is important to note that the glue must be fresh.
Sodium tetraborate. You can use powder, it is sold at the pharmacy.
Dye of the required color.

Creation stages:

Add 50-60 ml of warm water to the container.
Add PVA glue. The thickness of the mass will depend on this ingredient, so you can change its quantity as the process progresses.
Add 1 bottle of sodium tetraborate. And if you decide to use powder, then it must be dissolved in water.
After this, add the selected dye.

Now the whole mixture needs to be poured into a plastic bag and kneaded for several minutes. The child will be happy with the new toy.

How much does slime cost in the store?

Modern manufacturers offer to purchase the toy in different versions:

Glowing.
Solid.
Liquid.
In the form of animals or insects.
In grids.
In banks.
In packages.
Transparent.
And others.

The price will depend on this. Minimum price is 15-20 rubles. You can buy slime in a store or online. Today you will find a large number of offers.