How to make a metal fence. Iron fence for a suburban area How to install an iron fence

Structurally, metal fences are divided into three main types:

Blank fences. They are distinguished by a continuous canvas that reliably hides the territory of the site from outside view.
Through fencing. They freely transmit light and do not obstruct the view of the area beyond them. At the same time, end-to-end enclosing structures are quite rigid and reliable.
Sectional fencing. Such structures are distinguished by ease of assembly, high strength and excellent protective properties.

Types of metal fences

Based on their appearance, there are mesh, welded, forged fences and fences made of profiled sheets. Let's consider their features in detail.

mesh fence

The most common version of such fencing is a chain-link mesh attached to support posts. The material for such a mesh is wire, from which, by weaving and spot welding form square or diamond-shaped cells.

The affordable cost of a chain-link fence makes it extremely popular among homeowners. Such a fence does not prevent the penetration of light into the beds, creating favorable conditions for growing vegetables and other crops. In addition, it is quite reliable and does not require special skills for installation.

Another type of such fence is a fence made of galvanized mesh on a strip foundation. A layer of special coating applied to the main part of the structure protects mesh fence from exposure to weather conditions and precipitation. The sprayed material may have various shades, which makes the through fencing aesthetically attractive.

A metal mesh fence on a strip foundation is more rigid than a chain-link fence. The concrete strip of its base eliminates any deformation of the structure associated with movement groundwater. Such fences are often installed around sports and playgrounds, where a view of the entire area is of great importance.

Welded fence

Such a fence is made by connecting metal elements electric welded gratings. Sometimes they are combined with forged products. The parts of the fence sections welded together often form an artistic composition. If you correctly adapt it to the style of your home, welded fence will bring considerable aesthetic pleasure to its owners and their guests.

Such fences are durable, strong and relatively cheap when compared with fences made from forged parts.

Wrought iron fence

Creating a forged fence requires a lot of effort, accuracy and experience, so it is made by hand by professional craftsmen. The result of their painstaking work can be true work art. Forged fences are often distinguished by individuality and austere beauty.

Due to the high labor intensity of manufacturing, such a fence is not cheap. The master prepares each section separately. Then they are connected into a single structure by pillars, which can be made of steel, stone, brick or concrete. All these materials combine perfectly with artistic forging.

Fence made of profiled sheets

The popularity of this type of metal fences is due to at an affordable price materials used, their light weight and reliability.

The profile sheets from which sections of such a fence are made have a wavy surface. This significantly increases the rigidity and bending strength of the material. Such sheets are difficult to deform or damage. The service life of a fence made of profiled decking reaches 50 years.

During production corrugated sheets applied to their surface special paints, which after drying guarantee the material anti-corrosion resistance. They can have different shades. This simplifies the choice of color for the future fence. The thickness of the profiled sheets is 0.4-1.2 mm.

Installation of the fence is simple; it can be done independently, with or without a foundation. This structure belongs to the type of blind fences. Thanks to the laying of sheets of sections overlapping, a fence made of profiled sheets is practically free of cracks through which the area could be viewed.

Advantages and disadvantages of metal fences

The strength and reliability of metal fences has been confirmed by many years of practice in their use. In addition, the installation of such structures has whole line significant advantages:

Provides reliable protection garden territory from curious glances and intrusion of unwanted guests.
There is a wide selection of designs and materials for the construction of high-quality and beautiful fencing.
With proper care, metal fences are not afraid of precipitation, wind and corrosion.
The installation of blind fences provides the site with protection from the wind, and with a fence height of more than 3 meters - good sound insulation.
Welded, wicker or forged elements of a metal fence successfully harmonize with support posts made of natural stone, facing bricks and concrete.

The problems that the construction of such a fence creates are much less. These include the following:

Significant weight of materials, especially for welded and forged fences. It creates certain inconveniences during transportation and installation of fencing parts.
The need for periodic maintenance. If the anti-corrosion coating of the fence is damaged, it must be restored. Otherwise, the metal will rust and deteriorate over time.

Metal fence installation technology

It is quite possible to build any metal fence with your own hands. This will require possession of construction, welding equipment and simple tools. We will briefly discuss the technologies for constructing mesh, forged and some other fences below.

Fence made of profiled sheets

To install such a fence you will need profile pipes rectangular section for support posts and creating a frame, profiled sheets, self-tapping screws, grinder, screwdriver, drill, shovel, building level, hammer, cord and pegs. If the pillars are planned to be made of brick, you will additionally need cement mortar and protective caps.

First, you need to use pegs and a cord to lay out the perimeter of the fence, taking into account the location of the gates, gates and support posts. Optimal distance between the racks - 2.5 m. The depth of the excavations in the ground for them is 1.2 m, and the width is 0.2 m. After installation and fixation of each rack, strictly vertically according to the level of the excavation, it should be filled with concrete.

When it hardens, you can prepare the fence frame for covering with profiled decking. To do this, the support posts must be connected to each other by welding three horizontal pipes 40x20 mm, placing them evenly along the entire height of the supports. This procedure must be done with each pair of racks. After this, the frame should be painted, since after covering it will be impossible to do.

Profiled sheets should be installed overlapping on one wave, fixing them with self-tapping screws on horizontal guides. There should be a distance of 0.15 m between the bottom of the sheet and the ground surface to avoid early corrosion of the material from moisture. It is advisable to match the fastener caps to the color of the flooring. Using a screwdriver will make covering the frame much easier.

mesh fence

To install a metal mesh fence you will need supports, chain-link, wire, self-tapping screws, a screwdriver, a building level, pegs, a cord, a tape measure, M400 concrete, a drill and a shovel.

After marking the perimeter of the fence using a tape measure, pegs and cord, you need to dig holes for the supports. Their depth should be 0.6-0.8 m. If you have a drill, it can be used instead of a shovel. The posts in the holes must be installed strictly along the perimeter line of the fence. To do this, after installing the outer supports, you need to pull a cord between them and install the rest along it.

When all the pillars are in place in the design position, the holes should be filled with concrete and left until it hardens. This will take 5-6 days, it all depends on the weather and the quality of the mixture.

After this time, you should begin stretching the chain-link mesh onto the supports. To do this, you need to drill holes in the posts and pass wire through them. To prevent the mesh from sagging, a tensioning device must be installed in each span of the fence.

The mesh should be fixed to the fence using 6.5 mm wire. It should be threaded through the “chain-link” cells and welded to the supports. Welding must be carried out wearing a mask, special clothing and in dry weather, keeping in mind safety precautions. After installation is completed, it is recommended to paint the mesh fence with an anti-corrosion compound.

Wrought iron fence

Such a fence can be made by hot or cold forging. The last method is suitable for independent execution. To implement it, you will need machines for decorative twisting of sectional parts of a wrought iron fence, welding machine, a grinder, a bench vise and a set of household tools.

You should begin work by choosing the shape and pattern of the fencing lattice. Good ideas can be obtained from the Internet. Supports for gratings can be metal, concrete, stone or brick.

We will focus on the first option. It implies the following operating procedure:

Using pegs, a tape measure and a cord, mark the perimeter of the future fence, taking into account the location of all its posts.
Dig or drill 50x50 cm holes in the ground for supports. Their depth should be up to 0.7 m.
It is recommended to weld a reinforcement cage made of metal rods d. 10 mm. This reinforcement will increase the stability of the posts before attaching heavy forged fence sections to them.
Supports reinforced with reinforcement must be installed in prepared pits strictly vertically, controlling the installation process at the building level. To fix the racks in the final position, you can use spacers made of wooden blocks.
Fill the holes with the supports installed in them with concrete and leave them for a week for the mixture to harden.
After 6-7 days, the prepared sections of the forged fence can be attached by welding or bolted connections to the posts. The finished fence should be painted to prevent corrosion.

When using stone, concrete or brick to make posts, the procedure for installing a metal fence is the same. In this case, the steel pole will play the role of a reinforcing rod inside the decorative support. Due to the increase in the weight of the structure, a wrought iron fence with stone posts will require a strong foundation. Therefore, before installing metal reinforcing posts along the perimeter of the future fence, you need to dig a trench and lay a metal frame made of 12 mm rods into it.

How to make a metal fence - watch the video:

An iron fence has a number of properties that ensure its long-term operation: resistance to corrosion, high degree strength, resistance to mechanical deformation and external factors. There is a structure with similar characteristics - a reinforced concrete fence. However, it is heavy, which is not always suitable.

Selection of materials and calculation

The most popular design of a fence made of iron is the version with corrugated sheets. Used as pillars metal pipes(round, square section). Recommended sizes of these elements: for a round stand - from 57 mm and above, for a square analogue - 60x60 mm and 80x80 mm. The number of pillars is easy to determine.

It is necessary to make a sketch of the future structure, which will allow us to determine its perimeter. You will also need the width of one section, which corresponds to the distance between the racks. Next, the perimeter is divided by the span width.

The dimensions of the pillars were not included in the calculations; accordingly, it was assumed that the center of the pillar is the junction of two adjacent spans. As a result, the actual width of the section will be reduced by an amount equal to the width of one pillar or the sum of half the pillars. The amount of material filling the section, for example, corrugated sheeting, is determined based on the dimensions of one span between two adjacent pillars.

To fasten the profiled sheet, logs are used: 40x25 cm or 40x20 cm. For fence heights below 1,800-2,000 mm, 2 pieces are enough. crossbars To fasten all elements, a roofing screw is used, its quantity corresponds to 3 pieces. on the lag.

Fence installation - step-by-step work

If you select for installation iron fence, the sequence of actions will be as follows:

preparation, marking of the site;
digging holes, trenches - depending on the type of foundation;
arrangement of supports;
installation of logs;
fastening of corrugated sheets.

Iron fences of many types are mounted according to a similar pattern.

Site marking

The soil surface is cleared of weeds, holes and mounds are leveled. The perimeter of the fenced area is marked. In this case, it is necessary to make notes where the gate, gate and each fence post will be located.

This can be achieved through stakes. The perimeter is marked with a rope; the corners of the future structure must be straight.

An iron fence can be built on a columnar or strip-column foundation. Next, you need to dig holes for the pillars. The height dimensions of the base are determined by its configuration and terrain.

For example, the strip-column option involves digging holes for posts with a depth of 1-1.5 m, i.e. below the depth of soil freezing. The foundation section for the gate section is prepared with a depth of up to 0.5 m.

The diameter of the holes in the ground for the pillars varies from 25 to 40 cm. A sand and crushed stone cushion is laid at the base of the holes.

Preparation of the solution

For the foundation, take 1 share of cement and 4 shares of sand. To make the structure stronger, crushed stone is added. Before pouring the mixture into the hole under the counter, you need to moisten its bottom.

Features of installation of poles

Regardless of what type of fence is being built: reinforced concrete, iron or wood, installation is carried out using a building level, otherwise it will be problematic to make a level structure.

The stand is driven into the sand and crushed stone cushion. But you just need to do this as carefully as possible so as not to end up greater depth, since in this case there is a high risk of corrosion on the poles.

Types of pole installation

Fill concrete mixture should not be carried out to the top of the pit, but to a level of 10-15 cm below the soil surface. The remaining area is covered with soil, but only after the concrete solution has dried.

Attaching the log

If we compare iron and, then in the first case the sheet material is held on metal crossbars. In the second option concrete panel descends along gutters in the pillars. Similar elements are assembled like a children's construction set.

Various ways to attach joists

The iron fence joists are secured with self-tapping screws or welding. For these purposes, a special part was created - a cross made of channels. The installation distance of the logs from the top and bottom points of the column can be from 20 to 40 cm.

Installation of profiled sheets

To do reliable design, it is enough to use three screws per joist. The total number of fasteners per fence section will be up to 9 pieces, provided that 2-3 pieces were used. crossbars Adjacent sheets are mounted overlapping each other.

If you install using roofing screws with rubber gasket, the corrugated sheet will not be damaged.

Upon completion of installation metal frame, it needs to be painted. To do this, the pillars and joists are cleaned of dust and dirt, then primed and painted. At the final stage of fence construction, decorative overlays on the pillars. Reinforced concrete fencing panels and metal require different approaches to processing.

Metal fences are the most popular and in demand. They are easy to install, wear-resistant, practical and durable.

A fence made of corrugated sheets will protect your area from dust and prying glances from the street.

Advantages of metal fences

Durability. Long term service is ensured by the quality of the material, correct installation and timely care.
Reliability and durability. The design of the metal fence is practically not deformable and mechanical damage. The material withstands weather conditions well.
Increased security. Metal fence unapproachable. It is very difficult to overcome a high and massive fence.
Easy care. Simple measures are required for care. You just need to systematically treat the surface with anti-corrosion agents, clean it from rust and paint it.
Wide range of products. Currently, the market offers welded and sectional metal fences, fences made of corrugated sheets and chain-link fences in the corner, massive forged fences and other types.
Cost of metal fences. The price depends on the quality of the material, the scope of work on manufacturing the fence, the manufacturer, individuality, and the urgency of the order.

Return to contents

Tools and materials

A massive wrought iron fence is usually considered a sign of wealth.

Due to the fact that the construction of a fence is a multi-stage work, each stage requires various materials and tools, some of which are useful for several operations.

To build a fence you will need the following tools and materials:

To construct a trench and formwork, you need a building level, fencing pegs, fishing line or nylon thread, tape measure, crowbar, shovels, soil bags, a wheelbarrow for removing soil, wood screws, construction half-edged boards, an electric drill, wooden jumpers, knitting wire, reinforcing rods.
To fill the foundation you need rakes, shovels, steel sheet, large capacity container for mixing mortar, sand, water, cement, crushed stone, liquid soap, trowels, buckets for solution, plastic film.
To build a fence frame, metal pipes usually with a cross section of 60*60 mm, profile pipes measuring 20*40*2 mm, and embedded metal plates, shield or goggles for eye protection, electric welding, electrodes, alkyd enamel, construction level, grinder.
To install a fence made of corrugated sheets, you need corrugated sheets, roofing screws, an electric drill, cardboard, and a black marker.

Return to contents

Types of metal fence

Before building a fence, you need to choose the material and method of construction.

Using a metal sectional picket fence, you can quickly fence off an area.

You need to decide what you want to see as the final result after you build the fence.

Methods for installing supports

Alignment is carried out along a thread stretched between the outer pillars.

There are several ways to build a fence around an area. Before installing the supports, you need to determine the distance between them. It is usually 2-3 meters or corresponds to the size of the finished section when installing a welded fence.

As a basis for all types of fencing, the best option is a strip foundation.

Screw piles are also used. Their advantage is the possibility of installation on various terrain and any soil in any weather and season. For installation screw piles no additional investment required. Piles can be moved from one place to another. They can withstand even heavy fences. The posts are screwed in using special equipment or manually.

Concreting pillars. Using a drill, holes are drilled to a depth of 1-1.5 meters. Next, medium and fine crushed stone in a layer of 0.25 meters is poured onto the bottom of the dug hole. Then a profiled pipe is installed and leveled by level or plumb. For stability, pieces of reinforcement are welded perpendicularly to the bottom of the pillars. The lower part of the pipe must be treated against corrosion.

First, install the pillars in the corners, then stretch the cord between them. The rest of the supports are placed on it. Aligned and installed pipes poured with concrete or cement mortar in a ratio of 1 to 8. After this, an additional check is carried out with a string and a level, since after the solution hardens, correcting the defects will be extremely difficult. To build a high-quality metal fence, its supports are allowed to stand for several days.

Strip foundation used to build a fence on moving soils. A trench is dug along the perimeter of the site, 0.25 meters wide and 0.5 meters deep. For a metal fence you do not need to make a deep foundation. A sand cushion is poured into the bottom of the trench and water is poured over it. The foundation is tied around the perimeter with reinforcement. It should not come into contact with the bottom and walls of the trench. Therefore, pieces of brick are placed under the reinforcement.

The height of the foundation above the ground is 20-30 cm, for which formwork is installed before pouring the right size. In order for the foundation to gain the required strength, it must be left to dry completely for 7-10 days. The strip foundation will firmly hold the fence. Installed supports primed and painted to prevent corrosion and provide an aesthetic appearance. The tops of the pillars are covered from precipitation with special plugs or welded with pieces of metal.

DIY metal fence installation

Recently, metal fencing has become more popular and in demand. Metal products are first in terms of availability, durability, practicality and fire safety.

According to the experience of previous decades, the most affordable and applicable type of protection local area there was a wooden fence that quickly deteriorated under the influence of weather conditions and needed careful maintenance. Another way to isolate yourself was and remains buildings made of stone, brick and concrete, but they are very expensive, have large dimensions and require a lot of effort during construction.

Advantages and disadvantages metal fencing

Advantages of metal products:

Fences made from this material are created reliable protection land plot without separating it from the surrounding world.
Metal fences do not require complex maintenance - only painting as necessary.
The manufacturing material is steel or cast iron, so the fences are very durable and reliable.
There is a huge selection of design samples for building attractive and high-quality fences.
Manufacturing metal structures carried out taking into account all necessary standards and norms.
Metal fences with a certain coating have very high performance properties: they are not afraid of precipitation, rust, wind, or damage.
At the customer's request, enterprises can produce monolithic fences and through fences from steel sections. Sectional fence characterized by enhanced rigidity and strength.
The metal elements of the fence are in perfect harmony with the pillars made of different materials– bricks, natural stone, concrete, etc.
Fences made of metal sheets create reliable protection from the intrusion of offenders and the gaze of the curious.
They also provide excellent protection from the wind, and with a height of 3 meters they create good sound insulation.
Metal fences can be used to fence off not only residential buildings, but also commercial, construction, and domestic buildings.

Disadvantages of metal structures:

The biggest disadvantage of metal fencing is its cost. It is naturally lower than for brick products, but still higher than for wooden fences.
Also to negative point weight also applies metal product. Because of it, there may be difficulties during transportation and difficulties during installation or dismantling.
If the anti-corrosion coating has deteriorated, the fence will quickly begin to rust. And the more humid the climate, the faster this process will occur.
You also need to monitor the quality of the purchased material: if you purchase a profile that is too thin, you will hear quite unpleasant sounds when there are gusts of wind.

Types of metal fences

Metal structures are different:

Wrought iron fence

This is simply a real work of art. Masters of decorative forging create it by hand. This is hard and painstaking work, as a result of which it is not cheap. Forged metal fences go well with any metal, brick or stone.

Chainlink fences

They win because they miss Sun rays to plants, extremely easy to install and repair. But structures made from this mesh also have certain disadvantages: absolute openness, ease of breaking the integrity with wire cutters, and rodents crawling into the area.

Fences made of corrugated sheets

The best option for those who want to have reliable protection for their home and not worry about the endless maintenance of the fence itself. Their advantage is also that at a height of 3 meters they create good sound insulation. If enhanced noise protection is required, you can use a double corrugated sheet with sound-neutralizing material.

Structures made from corrugated sheets are easy to repair and can be washed with a hose. There is a huge selection of colors. These fences are easy to install, but quite expensive.

Welded mesh fencing

Also in wide demand. Fence sections are made from steel wire, the edges of which are welded to a durable pipe frame.

The wire in the frame can be placed at right angles or diagonally.

Wire fence fence

It stands out for its affordable price, reliability, long service life and appearance. Welded lattice fencing is made from individual rods, which are connected by welding to each other in the form of a lattice and are often sectional. Such a grid can be made of profile or round pipes.

Forged-welded structures

These are fences in which welded gratings are decorated with forged openwork parts. Unusual forged-welded fences absolutely correspond to all indicators of metal products.

Metal picket fences

This product looks the same as a wooden one, but has all the advantages of metal fences. The advantages also include relatively inexpensive cost and ease of installation.

Preparing tools

To create a picket fence you will need the following set of materials and accessories:

beams for posts 100 by 100 mm;
boards for crossbars 40 by 100 mm;
picket fence 25 by 80 mm;
long bolts, screws, washers and nuts;
cement, sand, gravel.

The kit for a fence made of corrugated sheets has the following components:

pillars made of profile pipe;
veining for transverse laying;
corrugated sheeting;
metal screws;
fence strip;
if the fence is with brick pillars, then you should purchase caps to close them.

For independent arrangement Forged construction requires the following tools:

Bulgarian;
welding machine;
twisting device;
spray gun with compressor;
vice;
small tool.

For chain-link fencing you need:

pillars for the frame;
pole fasteners;
screwdriver;
concrete or cement composition for the base of pillars;
rope;
construction centimeter;
pegs;
level;
drill or bayonet shovel;
Rabitz;
wire.

Fence installation

From corrugated sheets

Installation of pillars. The optimal distance is 2.5 m, a suitable depth is 1.2 m with a width of 0.2 m. After installing the support, the pit is tightly filled with a mixture of gravel, sand and brick fragments.
Fixation of veins. It is performed by welding to give the structure strength. Three transverse parts are fastened.
Arrangement of corrugated sheets. Fastening is carried out using self-tapping screws; it is better to match it to the color of the sheets. It is optimal to overlap on one wave; an indentation of 15 cm should be made upward from the ground so that in the spring the material does not drown in water. There is no need to make holes in the corrugated sheet beforehand, as special metal screws are used.
Installation of the plank. It's hard to get a completely straight line top edge fences. For this purpose, a fence strip is installed on top to eliminate unevenness.

An additional advantage of the structure made from profiled sheets is quick repair in case of damage to one of its sections. Installing a metal fence does not present any great difficulties and requires minimal skills in using construction tools.

Detailed step-by-step instruction is in .

The process is clearly shown in the video:

Mesh

Digging holes for posts. The width of the hole should be approximately the width of a shovel and a depth of 60-80 cm. Do not exceed this depth, as there will be an unjustified overconsumption of the solution. This will also increase final cost chain-link fence.
Installing the posts exactly along the line. For this purpose, it is necessary to install the outer supports and stretch a rope between them.
Pouring pillars with concrete. After filling the holes with solution, you should leave them for some period to dry. Optimal time— 6 days, it directly depends on the quality of the concrete. Before purchasing it, you should consult with professionals and study its properties and characteristics.
Mesh tension. It is necessary to pass the tension wire through the holes in the posts. To prevent the mesh from sagging, a tensioner is installed on each span. Braces are installed between the outer pillars so that when tensioning, the support threads do not tilt and remain in place.
Fixing the mesh fabric. For this, wire with a diameter of 6.5 mm is used. It is threaded through the mesh cells and welded to the posts. At welding work You need to remember about safety precautions: a mask, glasses and overalls, checking devices for malfunctions. It is also forbidden to perform work when high humidity and precipitation, the equipment should be turned off between uses.
Cover the posts, wire and braces with paint.

You can read more about installing this type of fencing.

In the next video you can see step by step process chain link installation:

Forged

If you have made a decision, then you need to start by choosing its form. There are several types of fencing with forged sections. Of these, the most popular are fences on metal poles, as well as using a base made of stone, concrete or brick.

When arranging a structure on metal supports, the following procedure is recommended:

Mark the area by installing wooden pegs in the places where the posts will be placed.
Dig holes under the concrete base for the posts. It is enough to make depressions 50x50 cm and a depth of up to 70 cm. You can dig with a shovel and select the soil with a shovel tool.
To increase strength, you can make a frame from reinforcement, to which you need to fasten the support by welding. Under the racks you can take regular or profile pipe required sizes. If there is frame reinforcement, then it is optimal to use rods with a diameter of up to 10 mm.
Fill a hole with a vertical stand concrete composition. When making a solution, take 1 part cement and 3 parts sand with crushed stone. The base will become strong within 6-7 days, after which the sections themselves can be equipped.
If you use brick, concrete or stone for the pillars, then the sequence of work will be the same. The only difference will be in the larger volume of construction - you will have to lay brick or stone yourself and pour concrete parts. In addition, such a foundation requires a more powerful foundation. For this purpose, you need to dig a trench around the entire perimeter of the fence, and also weld a frame from rods with a diameter of 12 mm.

It is convenient to install forged fences of any design with helpers, because the sections are quite heavy. For the same reason, you will have to use transport of a certain carrying capacity to deliver all the parts to the site.

From a picket fence

The procedure goes step by step like this:

Installation of corner posts. If you simply dig them into the ground, the structure will not last long; it is better to first install steel anchors. To do this, dig a hole up to 1 m, lower a pipe into it, into which the anchor is mounted, and then fill it with solution. After approximately 3 days, they begin to install the supports; this is done by fastening them to the anchors with screws or long bolts.
When making a fence from a picket fence yourself, you need to comply with all technological standards and subtleties of each stage. When installing a tin pipe formwork, it is specially raised before pouring the solution so that it fills the bottom of the pit. This is done to form a concrete base, which will prevent the pillars from being pushed out after frost.
Creation of transverse veins. Before fixing the cross beams, the top edge is beveled to prevent rainwater from accumulating on the surface. The crossbars are inserted into the grooves of the supports and secured with self-tapping screws.
Picket fence equipment. Each part is attached to cross beams 4 screws: 2 at the top and 2 at the bottom. In order to prevent cracks on the pickets when screwing in the fasteners, you should do it in advance in the right places holes using a drill slightly smaller than the diameter of the screws. To maintain an equal distance between sections, use a special template bar.
Having erected a fence from this material, it needs to be made more attractive. To do this, the fence is coated with compounds based on light-resistant particles.

The step-by-step process is also shown in the video:

Metal structures are durable and reliable. Although, like other analogues, they require care. If necessary, they need to be painted, while simultaneously removing rust and loose parts of the old paint.