Slippery tiles - how to make them non-slip. Slippery tiles on the floor. How to solve this problem? How to make tiles non-slip

It often happens that floor tiles purchased for a bathroom turn out to be slippery. What should you do to protect your household as much as possible from possible problems? We will talk about this in this article.

To begin with, I would like to note that all manufacturers of ceramic tiles, as well as sellers, are well aware of the problems that glossy ceramic tiles can create when in contact with water. This is why many bathroom and shower tile collections include floor tiles with increased slip protection.

As a rule, any matte tiles is able to adequately withstand water and provides necessary security during operation. In case of great concerns, the consumer can always choose a tile with a maximum slip-resistant surface - an ultra-matte coating, a special transparent film on the tile, and more.

You should be extremely careful when choosing tiles. To avoid the problem of slippery tiles in the bathroom and the subsequent search for its solution, it is enough to consult with the store manager regarding the most suitable models floor tiles for a bathroom or shower.

We also advise you to read our materials that will help you choose the right tiles for your bathroom: Tile for the bathroom. Features of choice.

However, what to do if the tiles have already been laid, and an unpleasant surprise in the form of a slippery surface manifests itself? In this situation, you can use one of several possible options.

1. Place a rubber mat on the slippery tile.

Most people come to this simple and quick solution to the problem. And many of them end up disappointed. Since suction cups are most often used to secure the mat on the tile surface, which, if constantly wet, very quickly become unusable. Budget samples of rubber mats with suction cups do not initially guarantee high-quality adhesion to the tiled floor, and in themselves can cause slips, falls and injuries.

To securely fasten the rubber mat to the floor, you will have to drill the tiles and secure the mat with bolts. This process should be approached with due professionalism and accuracy.

2. Anti-slip tapes.

They are thin rolls with a rough coating, which are glued with waterproof glue to the surface of the tiled floor. You can find ribbons that are as close as possible to the color of the tile.

The two methods described above left their mark on the aesthetic appearance of the floor and the entire room as a whole. The third option does not have this disadvantage.

3. Anti-slip agents for tiles.

A special anti-slippery tile agent creates a transparent film on its surface, making it completely non-slippery. Such coatings do not react to moisture, do not wear off, and last very well. for a long time. Of the few disadvantages of this coating, we can only name the color of the tile that slightly loses its brightness. However, here too much depends on the specific product chosen. You can pick up anti-slip impregnation at any building materials store.

We have described the main ways to make floor tiles non-slippery. If you have any questions, please contact the specialists of the Keramacenter company using the contact information provided on the website - we will be happy to advise.

Are the tiles slipping indoors? How to solve this problem, what anti-slip agents are there and how effective are they? Check out this article to learn how to effectively deal with slippage in your premises!

The tiles are slipping - what to do?

This problem often takes people by surprise after the first incident, when someone could have already suffered from a fall. The notorious "Caution, slippery floor" sign. Even with a warning, visitors may not be protected from an incident. A completely different situation is also possible, when a slippery floor threatens the safety of your own home. What to do when the bath mat doesn’t always cope with the task, and the floor, even when completely dry, slips very much?

Firstly, it is worth familiarizing yourself with the entire range of modern anti-slip products that are on the market. They are divided into four main types: anti-slip tapes, rubber mats, profiles or linings on a mounting base, as well as liquid anti-slip agents. How to choose what is right for you? Check out the characteristics - their disadvantages and advantages will help you make your choice. Let's look at each of the anti-slip agents in more detail.

Types of anti-slip coatings

Anti-slip tape

Are the tiles slipping? Anti-slip tape will help eliminate slipping indoors. This type coatings have several types, which vary depending on their composition and structure. Such tapes are very multifunctional: they can also be used in production premises and in swimming pools, sports areas or large shopping centers, in fitness rooms and cottages, etc. For example, tapes for “barefoot” areas are used in gyms and water parks, and warning tapes with abrasive chips do an excellent job in production. This tape easily adheres to any surface and can last a long time if used. correct selection for Wednesday.

Rubber mats and carpet

They can be successfully used in any premises, but they disturb its appearance, which is sometimes undesirable: for example, in premises where great importance is given to conservation original form premises according to his design project.

What to do if the tiles are slipping at home? An exception may be home premises, in which such coverings should not cover the floor space (for example, kitchen and dining room, shower room and bathroom). However, if this coating is still suitable for the type of room, it copes with its tasks quite effectively. The only thing that is required of you is constant care for it.

Profiles and overlays on various bases

If the tiles are slipping on the porch or steps this type coatings are quite suitable for solving this problem. Its advantages include strength and good protection from possible falls. One of weaknesses such coverage may be fragility due to seasonality, negative influence weather conditions and temperature changes.

Liquid anti-slip compounds for tiles

Are the tiles slipping? Try using liquid coating. Liquid anti-slip agents are special chemical compositions, affecting the treated surface in such a way that the coefficient of friction increases. Perhaps this remedy should be considered one of the most simple way getting rid of slipping, which can be used in the most for various purposes with different requirements. This type of coating protects the entire surface area of ​​the floor, which makes it even more effective, and weather conditions do not in any way affect the quality of its work.

Our company Slipguard operates on the basis of quality Finnish technology and provides floor covering services liquid composition anti-slip. We have been working for more than 6 years and during this time we have managed to get our teeth in and establish ourselves, having received grateful clients with whom we continue to cooperate today. Go to the Clients page to find out about those who are already using our services. Do you have any doubts? Contact us to receive your first free on-site demonstration.

Taking care of you and your loved ones, Slipguard Quality Team!

If there are slippery steps on the porch, what should you do? This question is usually asked by property owners who are faced with the problem of slippery stairs finished with ceramic tiles, natural or artificial stone. Beautiful and practical in dry weather, such stairs become slippery when water and snow get on them. This phenomenon can lead to falls, which can lead to injury or death. In addition, the tiles in the pool are constantly wet and require great care when walking on it.

You can ensure that the surfaces of floors, stairs, curbs and showers are non-slip using several effective ways. They vary in type of execution, aesthetics and durability. Let's look at how it is processed various material so that people do not slip on it, regardless of whether they walk barefoot or with shoes, in rain or snow, or during spills of organics and chemicals.

Anti-slip stone treatment

Granite is the material that has all the qualities necessary for finishing floors and steps. A natural stone very beautiful and has incredible abrasion resistance. But a granite porch becomes very slippery at the slightest wetting with any liquid substance. Since winter in our country lasts from 3 months to six months, the steps must be safe during this entire time.

You can make natural stone on the porch non-slip in the following ways:

1. Heat treatment. For this purpose it is used gas-burner, which creates a high temperature flame. When the stone is rapidly heated, the quartz crystals on the granite surface are destroyed. Its surface becomes matte and rough. Heat treatment of the stone is carried out in the house, since outdoors the pores in granite quickly become clogged with dirt and snow.
2. By grinding. Using special equipment, many grooves are applied to the surface of the stone. This makes it non-slip when wet. The entire surface of the step or several strips can be processed. But this option is only suitable for internal home stairs that do not come into contact with snow and an abundance of dirt that is carried on the soles of shoes.
3. Sawing. This method is the most practical, although the most expensive and time-consuming. Cuts are made in granite. They are made with a milling cutter or sandblasting machine. The resulting grooves are left empty or filled rubber inserts. The inserts are made of a material that creates ideal grip on the sole.

Even very slippery granite steps can be turned into a comfortable and safe structure using modern technologies.

Anti-slip treatment for porcelain stoneware

Ceramic granite is becoming an increasingly popular finishing material. His appearance and performance characteristics almost equal to the indicators natural stone. At the same time, the cost of porcelain stoneware is much lower.

It is impossible to grind and burn porcelain stoneware, since it contains polymers that give the material viscosity. In addition, plasticizers are not resistant to high temperature. You can make the coating non-slip only with the help of special inserts. Cuts are made under them, which can be single or cover the entire surface of the steps.

Inserts are made from the following material:

1. Dense and wear-resistant rubber. It is resistant to abrasion, ultraviolet radiation and chemically active substances. If damage occurs to the inserts, they can be easily and quickly replaced without stopping movement.
2. Granite bars. The bars are matched to the color of the steps or in a contrasting design. The parts are connected using epoxy glue, which protects the joint from moisture.

In order not to waste time and effort on processing porcelain stoneware, you can purchase tiles that have anti-slip corrugations pre-made. Snow and water will be forced into the recesses of the tiles, preventing unwanted sliding.

Anti-slip treatment for ceramic tiles

Ceramic tiles do not have a uniform composition throughout the entire volume. Its outer decorative layer must not be damaged. Therefore, you can only combat slipping with the help of external pads.

The following products are used for this:

1. Aluminum corrugated strips. They are attached in the middle of the step using glue or self-tapping screws. Metal strips can withstand several seasons of intensive use. They are replaced as they wear out.
2. Rubber pads. They are mounted on the edge of the steps, which is the most dangerous place. In addition to the safety function, such overlays protect the edges of the tiles from inevitable chips.

You can worry about the problem of slipping in advance by purchasing corrugated tiles. This option will solve the problem of precipitation in the form of rain and light snow.

Universal anti-slip products

Thanks to modern technologies The problem of slippery floors and steps can be solved easily, effectively and beautifully.

Innovative solutions to this issue eliminate any dirty or noisy work.

Property owners can use the following means:

1. Anti-slip liquid. Getting on the surface of any material, it removes silicon molecules from it. They form microscopic sharp cones on a plane. Ideal grip with the sole is achieved without losing the quality of the appearance of the lining.
2. Anti-slip tape. It is a strip of PVC, one side of which is sticky and the other is corrugated. The product is inexpensive and easy to install. But this tape won't last long.
3. Anti-slip tapes. Very convenient devices having an abrasive or non-abrasive surface made of polymer plastic. Available in regular and fluorescent versions. Can stick to flat and curved surfaces.

This video shows the process of installing anti-slip pads on steps.

You can use different types of devices on one staircase.

Slippery tiles on the floor in a bathhouse are quite a serious problem. Although in the store we try to choose a special one for the floor. floor tiles, rough, we consult with the seller, however, often only during the first wash we notice that the tile, which seems to be normal in all respects, suddenly becomes very slippery when water gets on it. This is especially noticeable in washing department when, while washing, you sit on or get up from a bench, and your legs begin to move apart on the floor. It won't take long to break your legs, or even worse. On the website http://kerama-kursk.ru/ you can buy tiles that really won’t slip. Look at the store catalog and choose the texture of the tile you like.

The most famous, old, time-tested solution in such a situation is wooden walkways(traps). We put them in the most dangerous places, and the problem is solved. After the bath we dry it. Such bridges serve well long years. Their disadvantages: they take up additional space, when washing the floor they need to be put away somewhere, they absorb dirt, etc.

Another way is laying various rugs on the slippery floor, rubber or rubber-based, silicone, with or without suction cups, cork, etc.

Another way is to increase the coefficient of friction of the tile itself using preparations for anti-slip treatment of tiles. There are two types of such drugs.

Some of these drugs act on the surface layer of the tile with a mixture of mineral acids, which, by corroding it, create microcarpets. For example Technogrip 200B or Slip.Net. Others enter into a chemical reaction with the tile and form microscopic multidirectional crystals on its surface - spikes. For example Slidex, Slip Stop, Slip Guard and others. On dry tiles, the results of such treatments are barely noticeable, but on wet tiles the coefficient of friction increases noticeably.

Both of these products somewhat reduce the gloss of the tiles, and if on matte tiles this is little noticeable, then on glossy tiles the reduction in gloss reaches 20%, so before treating the entire surface of the floor, it is advisable to carry out an experimental treatment or on some not too noticeable area of ​​the floor, or on a sample of the same tile, possibly left over after installation. Processing is carried out according to the instructions. First, apply the composition to the surface, then leave it for some time. established by the instructions time, then wash off with plenty of water. If the tile remains insufficiently rough, the treatment is repeated. As a rule, the warranty period for the results of such work is two years, after which, if necessary, the processing is carried out again. First of all, this period depends on how many people walk on it and what shoes they wear. In a public bath or swimming pool, the anti-slip effect lasts less, in private bath, naturally, longer.

Non-slip flooring in the bathroom is possible. As for materials, there are not many options, because it is necessary to combine moisture resistance and non-slipperiness. But there are tools that can help improve safety.

Ceramic tiles - how to stop slipping?

Ceramic tiles, which are most often used on bathroom floors, can be non-slip. Don’t think that it’s enough to choose a tile with a rough, and therefore unglazed, surface, and the problem will be solved. Of course, a tile that is not covered with glaze slides much less, but it does not have such high performance waterproof, which means you can lay it on the bathroom floor at your own peril and risk.

Output - in processing flooring a special anti-slip agent, which is intended for floors of bathrooms, showers, saunas, swimming pools, baths and others wet areas.

The treatment is simple: from time to time the liquid needs to be applied to the floor with a brush. When the floor dries, it will no longer slip, even if you step on it with wet feet.

When choosing a product that will protect the bathroom floor, you need to pay attention to the principle of its action. There are products that form a protective anti-slip film on the surface of the tile, which is reflected in its appearance: The tile becomes dimmer. In addition, cleaning the bathroom floors will be somewhat difficult until the film is washed off. But there are more modern anti-slip impregnations, the use of which does not form a film.

Porcelain tiles - non-slip flooring in the bathroom

One of best options bathroom floor finishing - porcelain stoneware. Experts believe that this material is even more suitable for finishing wet rooms than ceramic tile. Ceramic granite has a very dense structure, and, as a result, low moisture absorption. In addition, it does not slip. But this material is used much less often in finishing bathroom floors than ceramic tiles. Firstly, the name, which contains the word “granite,” is confusing. In fact, there is no granite in it, and the word is simply a synonym for strength (strong, like granite). Secondly, in the minds of many, porcelain tiles are something so bulky that they definitely won’t fit in a bathtub. Indeed, there are porcelain tiles in large formats, but there are also small tiles - like ceramic ones. There are many options between them. But the most serious factor that does not speak in favor of porcelain stoneware: the cost of it finishing material significantly higher than the cost of ceramic tiles.

Non-slip stones for bare feet

Stone tiles on the floor in the bathroom are luxurious, noble, and reliable. As for the sizes, these can be either large-format products (which look good on the floor in spacious rooms) or completely small tiles. Thickness – similar to ceramic tiles. Trying to make the stone non-slip, manufacturers treat it with mechanical and by chemical means. The mechanical way is abrasive brushes, which make the surface of the product rough, the chemical way is various means that not only give the surface structure heterogeneity, but also help it increase its “adhesion”. That is, such a stone repels water, but the soles of the feet do not (they stick to it like low-power rubber suction cups). However, there are anti-slip agents that can be applied to any stone products. But there is also an initially non-slip stone - artificial.

When finishing the floor in the bathroom, first of all, focus on safety. And don’t be fooled by the “reliefs” and “pimples” - if the material is sliding, then they will not help, and in some cases they can even provoke a fall.

But even if the tiles feel rough to the touch, it is better to play it safe and purchase an anti-slip agent.