How to connect to an existing gas pipeline? Features of tapping into gas pipes Rules for calculating throughput

Unauthorized connection to the gas pipeline has Negative consequences for the offender, as well as may lead to the creation dangerous situations for others. Such an action is carried out unprofessionally, in violation of technology and safety regulations, which already implies severe punishment.

And also with such a connection, the consumer uses gas without metering and does not pay for it. What pushes residents of apartments or private houses into illegal installations is the desire to save money and steal from the state.

And it is fair that for such theft the offender bears financial and even criminal liability. To him a fine is issued for unauthorized gas connection, the amount of which is determined on the basis of the law and the consequences of the offense.

Reasons for unauthorized connection

It is difficult for a consumer to provide himself with normal living conditions in an apartment, especially with a gas water heater, if his gas is turned off for debts. But instead of collecting funds after shutting down the system, paying off the debt and officially inviting specialists to connect gas equipment, the debtor decides to commit an offense.
Owners of private houses can also crash into the network on their own, production premises who have not yet received permission to officially connect.

Unauthorized tapping of a debtor is not just the theft of a resource from a gas pipeline. It puts his neighbors at risk, because if the connection is incorrect, a gas leak may occur.

ATTENTION! Most often, fines for tapping into a gas pipeline and theft of gas by a subscriber are committed by those who were previously disconnected for arrears in payment utilities.

Unauthorized insertion

Unauthorized connection gas stove, water heater, heating boiler - this is connection to gas mains without permission. The permit must be issued by the enterprise that supplies gas in the given territory.

The pipelines are the property of gas transportation companies, gas distribution companies, and legal entities that own gas transportation equipment. Consumers to whom these authorities supply gas sign an agreement with the supplier and pay for its services according to the amount of expenses.

If the gas was turned off for non-payment or the new residential premises have not yet been officially connected to the network, you do not need to deal with the connection yourself, or perform any actions with the metering devices (install them yourself or remove them, change the indicators). Before looking for information on how to crash gas pipe illegal, it is worth asking about the punishment for this violation and the size of the fine.

ATTENTION! The main document defining the punishment for these actions is Article 7.19 of the Code of Administrative Offenses of Russia.

Obtaining permission, completing documents, paying debts, and other expenses for official connection will not be as significant as fines to an individual for independently connecting a dispenser, removing a seal from a pipe, or illegally tapping into a gas pipeline.

If the disconnection was carried out without a meter, it is worth purchasing this equipment at the time of connection to save on gas bills in the future.

How is an offense detected?

Most often, an illegal tap into a gas pipeline is discovered during a residential inspection. If the supplier knows about the disconnected debtor, he will control the sealed equipment.

When a gas company employee sees the fact of a tap-in, he informs management about it, draws up a report, and calls an emergency team. The violator must sign a statement of unauthorized actions. The gas is turned off again, and the case of tapping is sent to court.

Types of punishment

Connecting a gas pipeline in a private house without official permission or breaking the seals from the pipe by the debtor may subsequently result in both administrative and criminal penalties.

The minimum consequences for the violator are administrative liability and a fine. If the fines are not paid on time, a late fee will be added to them.
But judicial practice knows examples of criminal liability. Gorgaz can sue apartment owners who crash into a gas pipeline as thieves of natural fuel.
Both a fine for tapping and imprisonment will not eliminate the need to pay for the use of gas for the time after the offense was committed. Debt fees are also charged.
It is not always possible to determine when the last check took place gas meter. In this case, you will have to pay an additional 35,000 rubles for connecting the stove, and 45,000 rubles for the speakers. If the boiler was also working to heat the house, the additional charge will be 5,000 rubles. The payment rate for the use of natural fuel in this case is the maximum.
A term of up to 5 years threatens those who decide to independently remove the plug, carry out an unauthorized replacement of the meter, crash into the network, and by their actions cause an explosion. If the gas is connected unprofessionally, a fire is difficult to avoid. An explosion can cause injury and even death to neighbors.

The awarding of a prison sentence to a violator for a term of up to 5 years is determined by Article 109 of the Criminal Code of the Russian Federation.

IMPORTANT! If a case of tampering ends up in court, the actions of the attacker may be punished by imprisonment. Duration – up to 2 years.

A fire in the house and the death of residents of neighboring apartments are the most serious consequences of unauthorized tapping. It should be remembered that it is much easier to get rid of debt, install gas equipment with the help of competent specialists (even if their services are paid), than to bear responsibility for such terrible events.

A poorly executed connection of gas pipes and equipment can easily be disrupted with one careless movement. A gas leak may not be noticeable immediately, but only as the substance accumulates dangerously.

Eventually the offender will be disconnected from the gas pipeline again. And he will be able to use gas only after fulfilling all penalties (payment of debt, fine, other amounts).

Fine amounts

Article 7.19 applies to those who illegally connected to the gas pipeline for the first time and those who did so after being disconnected due to debt. In both the first and second cases, a fine is provided.

An individual will pay up to 2,000 rubles.
Officials who use gas illegally pay from 3,000 to 4,000.
The largest fine is paid legal entities– up to 40,000 rubles.

Even a large fine cannot be compared with imprisonment, and it can easily be obtained from the court for unauthorized connection to gas pipes.

The apartment was illegally disconnected from gas

You can also encounter another situation when gas was turned off in a house or apartment by mistake or illegally.

Possibly for a long time new house not connected to the main line. Residents who use serviceable equipment and pay utility bills on time must respond to such actions.

If the gas is not connected, where can I complain to solve the problem?

First of all, you need to contact the gas supply company and write a statement about illegal shutdown. If there is no response, you can go to the prosecutor’s office, write a complaint to Rospotrebnadzor, to the Housing Commission.

Connection to the main line

The presence of gas in an apartment or house greatly facilitates the creation comfortable conditions residence. Therefore, more residential buildings are supplied with this natural fuel.

To connect the room to the pipeline, connect the stove, water heater, gas heating boiler, a special project is drawn up technical specifications. The documents for this project may vary slightly depending on the specifics of the connection object.
The supplier company checks the documents provided; the review may take one month.
The next step is the actual connection. It is carried out by qualified specialists. Meters with seals are installed, and a contract for the supply of fuel is concluded.

If you need to connect after being disconnected due to debts, you should also contact the supplier. But you need to pay off your debts first. It is possible that the meter will be installed or replaced at the same time; how much the work costs, you need to find out from the contractors.

ATTENTION! Correct execution process will eliminate problems, including financial ones.

Useful video

Report about the danger of a gas leak.

Replacement of gas pipes in an apartment, like any other pipelines, is required after many years of use. Therefore, if you plan to make repairs, pay attention to the service life of gas pipes, since leaks may occur in old pipes and, changing them, the repair will have to be redone at least partially.

Cutting old pipes is done with a grinder, and the products of such work will certainly not go unnoticed on the walls and other interior elements.

Replacing a gas pipeline in an apartment

As you know, replacing gas pipes with your own hands is prohibited, so only specialists from gas service companies are allowed to do this type of work.

Therefore, if replacement is necessary, you will need to contact the appropriate institution and wait for the technician to arrive.

Most likely, the first visit of a gas service employee will not replace your pipe, since the technician will need to inspect the gas system, measure the length of the gas pipes, draw up an estimate for the work, as well as the cost of new pipes for the household gas pipeline.

Gas pipe replacement work

Having arrived at the installation site, the technician must remove unauthorized persons from the site and ensure that there are no smokers or sources of open fire.

Before entering the work site, a warning sign “Caution! Gas!”, “Smoking is prohibited!”, “Passing is prohibited!” etc.

Before cutting a gas pipe and starting work on installing a new one, the gas installer must cut off gas access to gas pipeline, to which the new pipe will be welded, and remove (blow out) the remaining gas from it. Blow gas into the room ( ventilation ducts etc.) is strictly prohibited.

Once all safety precautions have been taken, the gas pipe can be trimmed. As already mentioned, it is usually produced using an ordinary grinder. Next to the place old pipe a new one is welded.

Checking the integrity of the household gas pipeline and gas start-up rules

The release of gas into the pipe is prohibited until its integrity, the presence of all required plugs and the serviceability of the connected gas equipment are confirmed by inspection and appropriate tests (soap emulsion).

When starting gas, the gas pipeline must be purged until all air is displaced from it. The duration of purging is determined by analyzing the gas samples taken.

The oxygen content in the gas should not be more than 1%, the combustion of the last sample should proceed smoothly, without popping. When blowing the gas pipeline, after the gas pipe has been replaced, it is prohibited to release the gas-air mixture into the room, the ventilation outlet, staircase and so on. When starting gas, the room in which the gas is being carried out installation work, must be provided with constant ventilation.

During and after the release of gas into a newly connected outlet of the gas pipeline system, it is necessary to ensure enhanced monitoring of the operation of the gas system.

Tapping into a gas pipeline

Apartment buildings are often equipped with a gas pipeline system even before residents move in. But what if you need to tap into the gas pipe of a newly built house? Let us describe what the gasification procedure at home looks like.

Preparation of necessary documents

The list of documents required to connect gas to the house is as follows:

those. passport for home or a certified copy;
a photograph of a topographic survey of the site on a scale of 1:500, certified by the gas service, with a gas pipeline and other communications marked on it (,);
permission to connect an architectural and planning institution to the gas pipeline;

documents for equipment planned for installation in a house to which gas will be connected - a certificate of conformity, a contract for servicing the equipment, a conclusion that it is subject to use in house construction;
inspection report (VDPO), received after contacting Gorgaz.

How to obtain permission to tap into a gas pipeline

In Gorgaz you will need to find out which design organization for gasification of the house they recommend, since this will be the key to the absence of problems in the future. You will need to agree with the design engineer on the placement project and brand of gas equipment and heating devices, after which the specialist will be required to independently approve the project in the technical department of Gorgaz.

Read the contract carefully. You should be interested in items with clearly stated guarantees on the part of the contractor.

Installation of a domestic gas system and connection to the gas pipeline

After installing the gas pipeline and equipment, the design organization draws up a package of as-built technical documentation. The work is accepted by a special commission consisting of a representative of Gorgaz, the contractor and the customer.

You will also need to pay for the technical inspection receipt and provide a copy of it to the installation company. In the near future, representatives of Gorgaz will seal the meter, and an agreement will be concluded with the customer for the supply of gas and maintenance of the part of the gas system belonging to it.

Don't know how to crash into a gas pipe? To do this you will need to hire special service, performing tie-ins.

Having connected you to the gas pipeline, specialists will open gas tap and will perform a test run of gas, thereby checking the entire system for leaks.

Having made sure that everything is in order, all you have to do is carry out commissioning of the equipment, which, however, can also be carried out by the selling organization, of course, if you have an appropriate agreement for technical and warranty service.

New gas pipeline pipes usually need to be laid after for long years their operation. You need to take care of this in advance, because gas plays a major role in our lives - it provides heat, light and allows us to cook food. The insertion of a gas pipe into a house must be carried out in accordance with all the rules of the law, but some people prefer to do it illegally rather than expose themselves to risk.

What is a sidebar

Professional gas workers explain this concept as follows: tapping is the process of attaching a new pipe to an already working one, that is, carrying gas. The entire procedure is carried out without turning off the supply of blue fuel, that is, the gas pipe is constantly under pressure. Therefore, you need to know the basic rules of tie-in to avoid trouble.

Surely you know about the types of gas networks. For example, if the design is designed to transport fuel to long distances, then such a network has high pressure. Making a tie-in in this case is quite dangerous, since the procedure has unforeseen consequences, both for you and for your neighbors. Do not experiment, but rather call a specialist who will specialize in the question of how to insert into a gas pipe under pressure. The specialist will conduct necessary measurements and draw up a cost estimate.

If you want to embed into the network, learn some rules.

Rules for performing work

The gas pipe always has its own certain pressure. Before starting work, remember these rules:

Tapping into a low-pressure network is carried out at values that do not exceed 80 mm. water Art. and don't go down to 20.
If you decide to make a connection to a network where there is high pressure, then first you need to lower it to the lowest permissible level. If this cannot be achieved, try to find equipment that cuts under non-standard conditions.

The gas pipe is a state-owned network, therefore, insertion should be carried out only with the appropriate permit and by special companies that have a license allowing this type activities. In all other cases, the process will be carried out illegally, which entails certain liability.

Welding and gas cutting should be carried out in areas with pressure from 40 to 150 kg/cm. It is very important to maintain these boundaries throughout the cut-in.

What types of sidebars are there?

To connect a new pipe to the house, you need to know how to combine the new network with the already working one.

Plunging requires precise movements and the right equipment, therefore, the entire process can be carried out using the following technologies:

No welding or cold tapping. With this method, the object remains working at the same level, that is, without significant changes in structures and pressure. Using a method without welding, gas workers connect new users to the networks. The technology for carrying out such work is quite simple, which is why it is popular among workers. Look quick guide You can watch the video from the net.

Welding. This method for bringing gas into the house is considered traditional. The new gas pipe is inserted into the working network by welding it. This method is dangerous, but reliable, so it can only be carried out by specialists with permission.

The insertion is carried out using the reel and tee methods. The reel method - a new pipe is connected to the end of the operating system, and the T-type - the insertion is carried out at the intersection of the network axes. You can visualize the differences between these methods using photos from the Internet.

Self-insert

If you decide to make an insertion into a gas pipe yourself, then first you need to properly prepare for this. You will need tools to use during the process. You need to select a set of them after choosing the method of inserting into the house. Approximate set:

pipes;
PGVM;
saddle;
myself welding machine;
cutter

The gas pipe is connected to the house using a saddle, which has significant advantages over a valve.

On this preparatory stage finished and the main question remains: how to insert into a pipe where there is pressure.

The following describes how to tap into a metal system under pressure.

Clear the surface. The gas pipe tends to rust, and there may also be paint on it. All this interferes with the insertion.
Mark the connection location and make a mark.
Make holes. If you are inserting using a reel method, then there should be one hole, if a T-type, then 2.
Treat the wells. The cracks are made of clay, and this process can be started while cutting the surface, since the gas pipe has pressure. After processing, cool the area.
After cooling, open the plug and remove part of the pipe from the structure. After this, place the disconnect device in the slot.
Next, proceed to install the pipe. Once the disconnect device has covered the gap, make a main hole for the new pipe. If you made a smaller diameter, then adjust it to fit your equipment. Install the pipe and weld its joints on both sides. Close the valve.
After you have welded the pipe, weld the new pipe. When the process is completed, check whether the new seam is gas permeable. This can be done using soap.
Attach the new pipe.

Tapping into a gas pipe without welding is quite popular and safe. Detailed description You can find the implementation online.

In general, the question of how to insert a new pipe into a house is relevant. You can carry out the work yourself or a team of gas workers. If you are not confident in your abilities, then it is better to entrust this task to specialists who will complete the task efficiently and quickly. It doesn’t matter what method it is: traditional or without welding. Remember also that before starting work you need to obtain Required documents so that you will not be held accountable later.

Gas has a responsible mission - to ensure that we do not freeze and starve. Meanwhile, he himself does not come to visit, for example, like the wind or the sun, gas must be properly “invited”, a green corridor must be organized for him and reliable “transport” must be provided. Let's look at how to crash into a gas pipe according to the letter of the law and like a hooligan - for those who like to tickle their nerves by breaking the rules.

Types of gas pipelines

A gas pipeline is a means of transporting and at the same time storing gas. These designs may vary depending on what mission they are performing. For example, networks that ensure the transmission of blue fuel over long distances are naturally more powerful and the pressure in them is high. Because of this, “experimenting” with such systems is dangerous, you can provoke trouble, and not only affect you, but also your neighbors. It’s better to let the relevant services that arrived at your request worry about how to make an insertion into a gas pipe of this format. From the pipes operating over long distances, like the vessels in the human circulatory system, small ones come off - called distribution pipes, in which the pressure is lower than in the main networks. But it can also vary - from low to high. You can already try to “make friends” with such structures on your own, however, you need to clearly know what and how to do, and also follow safety measures.

It is, of course, better to entrust the connection to the highway to professionals

Features of the sidebar

What is a sidebar? In professional terms, this is the connection of a new pipe to a working “relative” - already transporting blue fuel. Often systems are connected without turning off the gas, even main ones, but in this process there are important nuances. So, let's look at how to cut into a gas pipe under pressure.

Work rules

Remember the basic rules for handling these systems:

It is permissible to insert into a network with low pressure at pressure levels not exceeding 80 mm water column, but not lower than 20;
connection to highways or networks with high/medium pressure is possible only after its level has been reduced to an acceptable level;
if it is impossible to reduce the pressure, you will have to find special equipment that allows you to make insertions under unusual circumstances;
According to the law, work without reducing pressure is allowed to be carried out only by appropriate organizations that have permission for this type of activity (sometimes even receiving a special order);
welding and gas cutting can be carried out in areas with pressure from 40 to 150 kg/cm (and this corridor must be observed throughout the entire process).

Craftsmen working with the gas network must have a special permit. Before starting the process, make sure the contractor has such a document

Types of inset

You can connect a new network to a working system using the following technologies:

Cold tap, in which the main pipeline operates without changes (the volume of blue fuel in the structures and the supply pressure remain the same - working). According to this “scenario”, gas networks of new users are often connected to the main line. Many craftsmen know how to cut into a gas pipe without welding, since this technology is relatively simple.
Welding, popularly called " traditional way“, is a reliable, time-tested technique, although it requires certain qualifications and special access for the performers involved in the connection.

As for the insertion methods themselves, they are divided into:

reel, implying connection to the end of a working system;
T-bars, when the insertion is made with the intersection of the axes of the networks.

Video: connecting to the gas system with your own hands

Process description

Connection of metal systems

Surface cleaning. Remove paint, debris, and rust from the place where you plan to make the insert.
Marking. Determine where the connection will be, put marks.
Making holes (with the coil method - 1, with the T-bar method - 2).
Well treatment. The cracks should be treated with clay, and it is recommended to begin this process while cutting the surface in order to minimize the risk of burning/ignition of leaked blue fuel. The finished holes must be closed as quickly as possible with a special plug (made of asbestos and clay). The treated area must be cooled.
Installation of disconnecting device. When the metal has cooled, the plug can be opened to remove a fragment of the cut pipe from the structure. After removing the piece of metal, a disconnecting device is placed in the gap, which is a set of disks made of wood and rubber, as well as a bag of viscous clay. If you adhere to the T-bar method, then there will be two such slots.
Installation of the pipe. When the disconnecting device has covered the gap, it’s time to start making the main hole - for the attached (new pipe). Check that the diameter is correct; it is possible that the markings will have to be corrected. Make a hole and install a pipe. Weld the joints of the pipe on both sides, then close the valve on it.
Sealing the hole. So, the pipe is welded, now we need to weld a new pipe. To do this, first remove the remaining metal that appeared as a result of making the main gap. Insert them into place, treat them with clay, and brew them too. Check if the weld seam is leaking gas (using soap).
Connecting a new pipe.

After installation metal constructions It is advisable to paint them to protect them from corrosion

Insertion into a plastic pipe

Increasingly for installation utility networks use plastic structures. If you need to connect to such a system, what should you do? First, be glad that the process will not be more complicated than with metal. Secondly, strictly adhere to such recommendations.

Buy high-quality ones - factory ones that comply with GOST connecting elements(fittings), ideally metal. Use a socket joint and special glue to improve the reliability of the seam. Make sure that the joint is perfectly sealed and has maximum density. Before installation, treat the insert with an anti-corrosion compound.

How is the insertion itself carried out in the case of plastic nets? The connection is made by creating inserts located perpendicular to the operating system. The length of the inserts can vary between 70-100 cm. Extension should be done using plastic pipes- based on a socket-contact connection. What is this technology? The steel insert is heated (to approximately 60 degrees). And they’re already impaling her plastic construction, and instantly and with force. If you are cutting into a system with medium pressure, experts advise connecting powdered polyethylene to the “case” in order to make the connection as strong as possible.

This is how you connect to the plastic network

It is, of course, better to cut into a gas pipe with the help of professionals, however, having mastered the theory, you can experiment, meanwhile, it’s up to you to decide.

Video: inserting into a gas system using special equipment

Natural gas provides people with heat and hot food. However, to implement these functions it is necessary to bring it to the home - to equip a pipeline connected to the central network, heating equipment And household appliances.

At the highway design stage, it is necessary to understand what permits it is necessary to formalize how to properly cut into the gas pipeline and who to entrust such a responsible job. The answers to these questions are described in detail in the article.

In addition, we described different ways connections to the central main line, and also identified the features of connecting to a plastic and metal pipeline.

A gas pipeline is a specialized pipeline whose purpose is to transport and store certain volumes of blue fuel. It may have different design features, differing depending on the tasks assigned to the highway.

For example, networks of international importance deliver huge volumes of gas over long distances, so they constant pressure supported on high level. That is why any experiments with gas supply systems are inappropriate and can be dangerous not only for you, but also for others.

Which means the best option To carry out work with the system, you will need to call the appropriate services specializing in working with gas communications, which meets the requirements of the law.

The insertion into the gas pipeline must be carried out by a gas service specialist who has required level clearance and observing all safety measures

Gas pipelines are designed like the circulatory system of the human body. Their role can be compared to the coronary vessels. And from the central pipes, regional pipes depart, distributing blue fuel among consumers.

They are smaller than the main ones, and therefore the pressure in them is much lower. However, even in such gas networks, its jumps are possible both in a decreasing and in an increasing direction.

Connection to gas communications occurs if the organization has a special permit. And you can try to do the wiring inside your home yourself. To do this, you just need to know a clear sequence of actions and adhere to necessary measures security.

Rules for calculating throughput

The main factor responsible for the continuous supply of blue fuel to consumers is the value bandwidth gas pipeline. This parameter is calculated using a special algorithm. Moreover, it is done regardless of the type of pipes used.

The maximum throughput can be calculated using the following formula:

Q max. =196.386×D²×P/Z×T,

R – operating pressure maintained in the gas pipeline, plus 0.1 MPa or absolute gas pressure;
D– internal diameter of the pipe;
T– temperature of the pumped blue fuel, measured on the Kelvin scale;
Z– compressibility coefficient.

This formula establishes the following pattern: the higher the value of the T indicator, the greater the network throughput should be.

Otherwise, the gas transmission line will depressurize, which will inevitably lead to an explosion of this dangerous substance.

Having made a choice of the type of pipes for a gas pipeline, it is important to correctly determine the insertion method

There is a more complicated formula. However, the algorithm given above is quite sufficient to perform the necessary calculations prior to inserting into the gas pipeline.

How to properly connect to a gas pipeline?

Tapping into the main network cannot be carried out with your own hands - only with the help of specialists from gas companies who have permits and permission to carry out such work. Regardless of the chosen company, there will be a large-scale preparation stage before connecting to communications.

Preparing for the tie-in

If you decide to entrust the process of connecting to the gas network to specialists from the relevant company, then you need to contact the permitting service. Here, in addition to submitting an application in the established form, you will need to provide a package of documents required by law.

On the eve of the connection into the gas transmission main, it is necessary not only to make correct calculations, but also obtain permission from gas workers

When it comes to inserting a newly constructed building into the gas pipeline, the owner should first of all provide a passport, identification code and approved one.

In addition, you should prepare a set of documents:

statement, certified personally by the head of the territorial gas sector department;
connection permission to the gas transmission main, issued by the architectural planning department;
photograph, made during the topographic survey of the area where the insertion will be carried out;
technical passport for a private house , or a copy thereof certified by a notary.

The photograph must be certified by authorized gas service employees. It will depict the entire engineering infrastructure, including not only gas communications, but also water supply, heating network pipes, as well as sewerage.

If the house is under construction, then the appropriate architectural project, permission for its construction and floor plan.

And if its total area exceeds 300 sq. m., it is necessary to submit a thermal calculation of the building, a situational plan of the site on a scale of 1:5000, and consent of the neighbors to connect to the gas network, drawn up in writing.

Last document will be needed in the case where it is planned to run part of the gas pipeline underground through areas that belong to them.

On the eve of work on laying a pipe for insertion into a gas pipeline, it is necessary to obtain a documented permit of the established form

In most cases, permits of this kind are issued by the city gas department, since they are the rightful owners of gas transmission lines.

In addition, you will need to provide technical passports or other documents attached to gas appliances that are planned to be installed in the building - permission to use the equipment at the place of residence, certificates of conformity, as well as service agreements.

You will also need an inspection report for smoke ventilation ducts and other documents, provided for by law. Only having all the permits and acts in hand can you begin to carry out tie-in work, i.e. exclusively on a legal basis.

It must be remembered that unauthorized connection to main gas pipeline, without completing the necessary documents in accordance with the procedure established by law and coordination with the relevant services, is fraught with administrative measures. And if at the same time there was damage to the gas pipeline, then there will be criminal penalties.

Features of the tapping process

The process of tapping into a gas pipeline is the connection of a new pipe, through which the substance will be transported from the central pipeline to the consumer. As a rule, connections of this kind are made without cutting off the gas supply in the main network.

An example of tapping into a gas pipeline under pressure in the video:

Having a general idea about technical requirements and the procedure for carrying out work on connecting to the gas network, it will be easier to navigate all the nuances, and it will also become easier to control the work of the company with which the connection agreement has been concluded.

In addition, the absurd desire to cut into a gas pipeline yourself will disappear, inviting a handyman in order to save money.

Share with readers your experience in coordinating documents and connecting to the central gas pipeline. Please leave comments on the article and ask questions that interest you. The feedback form is located below.