Installing a lock into an interior door with your own hands. Simple installation of a latch handle on an interior wooden door (video) Installation of a door handle with a latch

An indispensable stage of a major overhaul of any room is the installation of windows and door panels, as well as the installation of a handle on the interior door. Depending on the type of handle, the corresponding standard fastening scheme is selected, which is quite simple in its implementation. But still, the procedure requires certain skills, knowledge and preparation.

Handles can have a stationary design or be equipped with a rotating and pressing mechanism. When purchasing, it is important to pay attention not only to the mechanism and the degree of its convenience, but also to the materials, appearance of the product, and its ability to fit into the overall interior design.

When choosing a handle for interior doors, you need to pay attention not only to its type, but also to its direction. There are varieties with left and right execution. It is necessary to clarify this point with the seller in advance.

Materials for work

Materials for work:

• – roulettes;
• – electric drills;
• – screwdriver;
• – self-tapping screws;
• – chisels;

• – square;
• – hammer;
• – a set of wood drills;
• – pencil;
• – conductor.

The conductor allows you to simplify the process of marking on the door leaf and spend a minimum of time on it. It must be attached to the end of the door so that at the end of the work its holes coincide with the lining of the tongue of the screwed handle.

Safety precautions

Not every owner trusts professional craftsmen to carry out repair work. Therefore, installing door handles is done by yourself.

To eliminate the risk of injury, you must follow the safety rules:

1. using a well-sharpened tool;
2. selection of high-quality handles with a smooth texture without burrs;
3. When using power tools, you must plug them into working outlets.

At what height should I install the handle?

According to the GOST standard, door handles are installed at a height of 1 m from the floor. But in their own apartments and houses, owners often neglect this rule, since they can install the door handle at any height convenient for them.

What should you consider when choosing the height to install the handle?

Experts advise choosing a location at waist level, which approximately corresponds to the proposed standard. The optimal option is a height from the floor of 0.8-1 m. But you can choose other positions depending on the height of family members.

How to make a hole for a handle and a lock

Most often, interior doors are sold with ready-made holes for the handle and lock. But you can also find door panels devoid of them. Therefore, before installing the handle on the interior door, you need to prepare holes for it and the lock. Main stages:

Handle installation

There is nothing complicated in the process of assembling the handle. It is enough to connect all the parts according to the attached instructions.

The following steps must be followed:

1. a locking mechanism with a tongue is inserted into the prepared hole and its functioning is checked;
2. The cover is screwed with universal self-tapping screws;
3. a rod is inserted inside the attached mechanism, onto which all the parts are named one by one, the handle with the ring is put on last;
4. the handle is fixed with tightening pins or self-tapping screws;
5. All that remains is to attach the decorative trim.

Lock installation

In modern interior doors, the lock is not installed separately from the handle. Installation of such fittings will be a little more complicated, but similar to the previous one.

Installation into the door structure begins with tracing the outline and drilling holes. Using a chisel, the required area for placing the mechanism is scraped out, and 2-3 mm of the door covering is removed to install the decorative trim.

The lock is being installed and its elements are secured. Only after this you need to install the handle and fix it. First, the nozzle is installed, then it is secured with self-tapping screws.

Installation of a plate for inserting the lock tongue into the door frame

It is impossible to complete the handle and lock installation process without installing the tongue plate into the door frame. The first step is to make measurements and accurate calculations so that when the handle is lowered, the tongue does not exactly align with the box part.

To make the procedure easier, you can apply toothpaste to the tongue of the mechanism vertically and close the door. In the place where the imprint of the element remains on the box part, you need to make a hole for the tongue.

You can make a recess using a chisel or drill. A metal plate with an opening is attached on top of it and secured with self-tapping screws.

Demonstration of installing a lock plate on a door frame step by step

Installation of handles for sliding doors

To work, you will need a minimum set of tools - a router with a cylinder cutter and a drill with feather and simple drills.

Stages of working with an oblong handle

1. you need to disassemble the handle, remove the plastic insert and decorative trim from it;
2. determine the location of the handle;
3. outline;
4. Using a 25 mm feather drill, make several holes through the contour to a depth of 12-13 mm;
5. Remove the rest with a chisel; you can entrust the work to a router;
6. A plastic liner is placed in the recess and secured with screws;
7. a decorative overlay is put in place and should click.

Mounting a handle with a magnetic lock

In fact, the design with a magnetic latch is installed in a similar way to installing a handle with a lock. It may be a little difficult to install the strike plate so that the lock closes smoothly.

You need to do the following:

• With the door closed, mark the top and bottom of the magnetic latch;
• outline the contour of the recess for the magnet;
• make indentations in the center with a feather drill or router;
• Using self-tapping screws, screw the bar and check the operation of the lock.

When installing a magnetic lock, you should not deepen the strike plate to the same level. There is a high probability that over time the magnet will no longer fit smoothly into the hole, so it will need to be displaced.

Handle and lock care

The best prevention is timely care of the handle and lock. This means periodic checks of functionality in case of downtime and regular lubrication of the lock. If the fittings become loose, it is necessary to tighten the handle so that the mechanism does not break in the future.

To ensure long service life of the lock, it must be lubricated annually. It is best to use machine grease or silicone grease for this purpose.

1. It is first necessary to carry out careful calculations and then carry out any actions.
2. When creating a through hole, you should be extremely careful and do not drill the door on only one side. This can cause chips on the back of the door leaf. As soon as the drill begins to show, passing through, you need to continue working on the other side.

After completing the installation, it is necessary to double-check the tightening force of the bolts or screws used so that poorly fixed parts do not soon damage the handle.

Video about installing a handle on an interior door

This video demonstrates how you can embed a lock and door handle into an interior door without expensive professional tools:

The process of installing handles on interior doors yourself requires not only strict adherence to the instructions, but also patience and accuracy. Work carried out in accordance with these recommendations will allow the fittings to perform their function efficiently and serve the owners for a long time.

Very often, when changing doors between rooms, we are faced with the question - how to properly install a door handle with a lock? With the help of this article, you will be able to install a lock on your interior door quickly and, most importantly, correctly, avoiding the mistakes made by many inexperienced people. In fact, this is not a difficult process at all; it takes an experienced master up to half an hour, but an inexperienced person in this matter can suffer for several hours.

In this article we will look at the installation of the most common lock design today. This lock consists of the following parts:

Lock Mortise Tools

To install an interior lock, you need a minimum set of tools; you most likely already have some of them, but if you have to buy something in addition, you will not incur large financial costs.

1. Tape measure and pencil;
2. Screwdriver or drill;
3. Stationery knife;
4. Chisels 10 and 20 mm;
5. Spade drill or 23mm forstner drill;
6. 2 mm drill;
7. Wood crown 54 or 50 mm depending on the thickness of the door;
8. Masking tape.

This is a list of the best tools you will need. Special kits for inserting locks are sold; they are relatively inexpensive, but it will be even cheaper to purchase everything separately. Often, such kits include a 22 mm feather drill; it is also suitable, but then you will have to widen the hole for the latch with a chisel.

Making holes for the handle of the lock mechanism

Like any installation process, the installation of a lock begins with markings. But before that, let’s protect the door leaf from accidental damage. To do this, we use masking tape to cover the end and plane of the door at the intended installation location of the lock, this is a distance of approximately 90 to 110 cm from the floor. Pasted masking tape will not only protect our door from damage, but also make markings on it much more convenient.

First of all, mark the height of the door handle with the lock. Most often, the handle is placed at a height of 1 m from the floor level. We measure this distance with a tape measure and put a mark on the plane of the door with a pencil.

When purchasing this type of lock, it always comes with a template for accurately marking the location of the holes. The cylinder mechanism of the lock may differ in diameter from different manufacturers, so purchase a wood crown after purchasing the lock. If your lock kit did not include a template, you can print them from this article as pictures and use them when installing the lock.

Gently bend the template along the line of the door ledge and attach it to the door from the end. Depending on the thickness of the door leaf, use a sharp object (a self-tapping screw or the tip of a feather drill) to mark the centers of the holes according to the template from the end and on the plane of the door.

Using a screwdriver and a wood bit, drill a hole in the plane of the door.

Advice: When drilling, be careful not to drill through the entire door at once. When, while drilling, the guide drill appears on the back side of the door, stop and start drilling with a crown on the other side, this way you will definitely avoid chips on the plane of the door leaf.

The next step is to drill a hole for the lock latch. Using a previously applied mark using a template on the end of the door, using a 23 mm feather drill, we drill a through hole to the previous one.

Keep the drill strictly perpendicular to the door, otherwise in the future the latch may become oblique and jam during operation.

The next step is to insert the latch into the end hole, align it with the edge of the door and trace it with a pencil along the contour of the decorative frame. After this, we take out the latch and, using a stationery knife, make an incision along the marked line in the top layer of the door leaf. And only then, using a chisel, we select the hole for the lock latch. The depth of the hole should be slightly less than the thickness of the latch frame; later, when you tighten the latch with self-tapping screws, it will be pressed into the wood and become flush with the plane of the door.

Advice: Many beginners immediately begin to cut under the latch with a chisel; this is incorrect, since the door leaf is covered with a film that can be damaged beyond the cut line with a chisel, so cut off the film first.

After selecting the groove, insert the latch into place and first, using a 2 mm drill, drill out the holes for the self-tapping screws and tighten the latch into place. If the latch fits into the hole tightly, then use a chisel to cut off the contact points between the latch and the hole.

Let's start installing the handle. The handle is assembled according to the instructions supplied with it. When installing, pay attention to the location of the closing tongue on the handle; if there is one, it should be located inside the room.

On one of the cylinder mechanisms there is a rotating pin and holders for mounting screws. Remove the decorative rosette from the mechanism using the pin wrench from the kit and mount it in place, screw the second cylinder mechanism on the reverse side.

When tightening the screws, do not overdo it - pinched cylinder mechanisms will not work as expected.

Install all parts of the handle in place according to the attached instructions, and the work on installing the handle is completed. In fact, this is done much easier than it seems; you can watch a video in which you will clearly see the entire process of installing the lock with your own hands.

Installation of the lock mate

The last step in installing a door lock on an interior door will be installing the counter part on the doorway.

Close the door and make two marks on the doorway based on the width of the lock latch.

Measure the distance from the corner of the door to the beginning of the latch.

You should have the same distance from the edge of the doorway to the beginning of the recess of the counter part. It is necessary to maintain this distance so that in the future the closed door does not move back and forth due to air movement in the apartment and does not knock.

If the answer needs to be recessed into the door jamb, then we place it in place and outline its outer and inner contours with a pencil. If there is no need to recess, then we outline only the inner contour. It all depends on the gap between the door and the jamb.

Using a drill of a suitable diameter (you can also use a feather drill, if the hole then does not protrude beyond the answer), drill a hole for the lock tongue and fasten the answer in place, having previously drilled 2 mm holes for the screws with a drill.

Do not forget to widen the holes for the screws to a depth of 2-3 mm, since there are protruding parts in this place on the back side of the answer.

We install the striker in place by tightening it with self-tapping screws and try to close the door; if there is excess play, we eliminate it by bending the tongue on the striker.

The insertion of the lock into the interior door has been completed, all that remains is to clean up the accumulated debris and enjoy the new handles on the doors.

Lock mortise with cylinder

Very often a situation arises when you need to install a lock on a door that already has a handle. Any lock with a cylinder is suitable for this.

Such locks have a rectangular shape and therefore the insertion process may seem difficult without the use of special tools. In fact, such locks are installed quite easily and with a minimum set of tools. You can place them at your discretion - above or below the already installed handle.

Lock installation sequence:

Installation of the lock mate:

• On the open door, we pull out the bolt (the retractable part of the lock) of the lock, that is, we close the lock with a key and, leaning it against the doorway, we mark what height we will have the counter part, focusing on the edges of the crossbars;
• Using a tape measure or square, measure the distance from the edge of the door to the middle of the lock and transfer this distance to the jamb of the doorway;
• Using a feather drill, we drill a series of holes according to the markings and then combine the resulting holes with a wood drill;
• Having previously secured the response part to the jamb, use a utility knife to cut along the contour, and then use a chisel to select the countersunk hole for the response;
• We install the counter part in place and check the functionality of the lock again.

Also, such locks often come with handles; the sequence of inserting such a lock does not change, only the operation of drilling a hole for the handle is added.

Well, that's it, the lock is in!

Be sure to watch the video on inserting a lock with a cylinder, perhaps in it you will notice some subtleties that you did not understand from the article.

If you have any questions, you can ask them in the comments. Good luck with the renovation!

Installing a handle on an interior door is an activity that does not require special skills or secret knowledge. Any man can cope with this task, even if he has held tools in his hands at least once in his life. Difficulties can arise only if a person has never been involved in any repair or construction work and has no interest in it. But in this case, there is nothing to worry about: from our article you will learn how to correctly, quickly and efficiently install a handle on an interior door. We will also talk about how to decide on the handle model, and how to correctly calculate the required height for its placement on the door leaf.

What does it consist of?

To make it easier to cope with the installation of door hardware, we will find out what parts and elements are included in the handle.

• Lever. This is the main decorative part of the product.
• Each handle has a special ring that is attached to the door.
• Rod and socket- also two integral parts of the door handle.
• Travel limiter. This element prevents the sash from hitting the wall when opening.
• Stoppers.

You can read about how to repair the handles of plastic windows in this

In addition to the above, the “composition” of a door handle also sometimes includes the following elements:

• locking mechanism;
• tongue;
• metal box cover; (so be sure to know)
• screw for tightening the structure. This part is necessary when the handle is installed on a hollow interior door.

It happens that the “composition” of the handle also includes a latch. In order to install such a model, you will need to insert an additional rotary screw. Keep this in mind.

How to choose

Let's find out what types of handles for interior doors are currently on the market, what are their features and advantages.

On the socket

This type of handle is the easiest to install. A large hole is not required here; it is only necessary that the rod of the product fit freely into the prepared round opening.

On the socket

From the outside, the hole is closed with a convex rosette handle, most often round and decorative.

Noba

This is the name of a handle with a rotary system that has a latch or has a keyhole. This is a convenient option for those interior doors that must be locked: to the bathroom, toilet.

However, the choice of such a model should be approached especially carefully: a knife made from low-quality material will quickly become unusable if used actively. It is also worth paying attention to what it looks like and how it can be installed.

Push

In order to open the door using this handle, you need to press it and move the handle down.

Push model

Everyone has come across these types of designs when visiting the offices of officials in some government agencies: it is in such offices that these laconic and practical models are most often found. But they are also installed at home, especially if the style of the home is also laconic and minimalist. But you can see how to choose a lock for a metal entrance door

Latch

This type of handle consists of two parts, each of which requires a separate insertion. This type of door hardware can be made with or without a lock. If the product is not equipped with a lock, the door will not be locked from the inside. The lock allows you to both lock the room from the inside and lock the room with a key from the outside.

Handle latch

In addition to choosing the operating principle of the handle mechanism, it is necessary to take into account the external design of the product, its shape, and the material from which the product is made. But this will help you understand what a multi-point lock on an aluminum door looks like, and how you can install it yourself

Most often, handles for interior doors are made of wood or metal.

But there are specimens made of glass, plastic, and even stone. Many people choose metal models with different types of external coating: chrome, nickel, brass, etc. In addition, pay attention to the fact that some types of handles are designed for installation on the right side of the door, and some on the left. Check this point with the seller.

You might also find it useful to know about

Tools

What arsenal of tools will be needed to professionally and efficiently install a door handle.

• A drill and a screwdriver are indispensable tools for drilling holes and tightening screws.
• Various drills. A feather is required, as well as crowns of different sizes.
• A hammer is a tool that is found in every home.
• Self-tapping screws.
• A pencil and a square will help position the handle on the door leaf perfectly evenly.
• A stationery knife, as well as an awl.
• A tape measure will help you determine the height of the handle to install.
• A jig is also useful - a kind of template used to install handles. It will make it easier to take measurements and drill holes.

Here's what it looks like and how to install it

Determining the required height

Let’s find out what tips will help you correctly calculate the required height for installing the handle.

But it should be noted that if we start from GOSTs, then these standards clearly indicate the height of the handle - this is one meter from the floor. Of course, in our apartments and houses we are not at all obliged to follow such recommendations, since in this case they are intended, rather, for professional builders.

It is best to maintain the same height of handles throughout the apartment, especially if the doors are located nearby. And in general, this approach is much more convenient, since, once you get used to opening doors throughout the house, you will already be “automatically.”

If you are installing a handle in a child’s room and the child is still small, it would be a good idea to take this nuance into account and equip the door to the child’s room with fittings located within his reach.

How to install

Let's find out what stages of work need to be taken to install the handle on the interior door yourself.

Before starting work, it is necessary to carry out markings so that the product is positioned correctly, evenly and at the required height. For measuring work you need a simple pencil and a square. First measure the desired height from the floor. As already mentioned, this height varies from 90 to 100 cm. Consider your height and arm length - select this parameter individually, based on your feelings: the main thing is that it is comfortable.

In order to correctly mark with your own hands, draw a horizontal line at the desired height using a square. The handle usually cuts in 6 cm from the end of the door. Mark this point on the resulting horizontal line. Do all the same actions on the other side of the door, having precisely determined the area where the product will be installed. At this same stage, you can also mark a place for inserting a recess under the tongue, if it is provided for by the model.

Having decided on the height and exact location of the handle, attach the jig at the end of the door in this place. It will make further drilling work easier. Take a drill and use it to make a through hole in the door leaf: it is clear that in the place where you intend to place the fittings.

Using a feather drill or a crown of a smaller diameter, make another hole in the same place, but from the end. Inside the resulting “tunnel,” insert the tongue of the product with the lock, and immediately check how it works on the spot. But this will help you understand how to install an electronic combination lock on the front door, and how to do all the work yourself.

On video how to install a handle on an interior door:

Trace the contours of the trim with a simple pencil, and then remove a small layer of material so that the part is installed aesthetically. Screw the cover with self-tapping screws.

Place the rod of the product inside the lining, and on top of it place the handle itself, equipped with a ring and a decorative rosette. If the ring fits too tightly to the door and rubs against it, it is necessary to grind off a little of the door covering with a chisel so that the ring is recessed into the door mass.

Screw the mechanism using self-tapping screws (usually three are enough), or secure with special pins. Attach a decorative overlay to the top of the structure. This most often requires a hex wrench of the appropriate size.

Latch Installation

Sometimes for doors in the house it is very convenient to use a model with a latch, which will allow, if necessary, to close the door tightly and securely, providing a person with peace and privacy in a separate room. Let's find out how to install a handle on an interior door with a latch lock.

Drill a hole in the door leaf - it must coincide with the area where the latch mechanism itself will be located.

If the latch has a tongue, you will need to cut another hole in the door frame for it. But in the case when the lock works by fixing the so-called halyard tongue, there is no need to cut an additional hole.

We looked at the features of installing a handle on an interior door. And, as was said at the beginning, there is nothing complicated here. Therefore, by choosing the right product, armed with simple tools and our recommendations, you can easily equip the doors in your home with stylish and necessary fittings.

It is difficult to imagine an interior door without such an attribute as a handle. The average person may find it difficult to independently install a handle on an interior door, but all doubts will be dispelled if you approach the matter correctly and have a positive working attitude.

What types of pens are there?

In nature, there are three types of door handles:

• stationary mechanism;
• with a push mechanism;
• with a turning mechanism.

Stationary handles do not have a locking mechanism. The operating process of the door is carried out through the action of force from itself or on itself.

The push type has a lever-operated shutter that, when pressed, pushes the tongue inward, allowing the door to open. The materials for its manufacture are most often the following: ordinary steel or a stainless steel sample, brass, aluminum or silumin, which combines not only part of the aluminum, but also a zinc alloy. For lovers of comfort, the most acceptable option would be a sample made of brass. Material of this origin perfectly maintains a temperature similar to the surrounding temperature, which does not cause unpleasant and sharp sensations of cold upon contact.

Types of door handles

Representatives of the rotary type are similar to push ones, but do not have a lever. Thanks to their round shape, the lock is released by turning rather than pressing. This is where their name comes from - rotary. There are several examples of this type:

• models with conventional snap mechanisms;
• a device that incorporates a latch combined with a latch and a simple-format lock;
• A model that includes an additional locking latch.

Another sample of rotary handles is being produced, the additional attribute of which is a button designed to block the door. This is a convenient moment for privacy rooms, including the parent’s nest. The only negative nuance can be considered the inability to open the door without free hands, which cannot be said about lever types.

Differences in installation work

The easiest option for installation is considered to be a stationary sample of handles. This product is attached directly to the door leaf. Screws in the form of a curved bracket are used as fasteners. When choosing a material for fastening, it is necessary to take into account the massiveness of the door, since their ratio is directly proportional to each other.

Installing a handle on an interior door using a push or turn mechanism is a little more complicated, the reason for this is that to attach them it is necessary to immerse the lock part of the product in the door cavity. To do this, it is necessary to violate the overall integrity of the door structure, which leads to an expansion of the list of tools used and the expenditure of a little more time. This is what gave them the name – mortise.

Handle installation

What is needed for the job?

Before you get started, you should definitely make sure that all the tools necessary for the job are available. This will certainly save a lot of time, effort and maintain the created working spirit.

During work you will need the following equipment:

1. Pencil;
2. Centimeter or tape measure;
3. Ruler in the form of a square;
4. Drill;
5. A set of drills, including a feather drill;
6. Chisel;
7. Screwdriver;
8. Bit;
9. Hammer.

You need to make sure that all electrical appliances are in working order, outline the scope of work, and adjust the lighting to the proper level.

Place for the handle

You can insert the handle into the door yourself only when the door is completely immobilized. This can be achieved in two cases: by removing it from the hinges, and if this is impossible, you need to substitute a foreign object that can hold it at rest (for example, a stool).

Since overhead handles are very easy to install, there is no point in considering the process itself. In addition, the use of mortise models has become popular. It is from their example that one should learn and gain experience.

Initially, we decide on the location of this unit. This refers to the installation height of the interior door handle. Often, its norm varies within 1 meter from the floor surface - this is the most optimal footage, suitable for both a child and an adult.

It is necessary to take into account the location of handles on adjacent doors, if any. It is also worth paying attention to the texture of the door itself, checking for the presence of fittings on the surface, or other distinctive irregularities and protrusions that may affect the location of the handle.

Having marked the height point on the door leaf, draw a horizontal line using a pencil and a charcoal ruler. We retreat 60 mm from the edge of the door, revealing the location of the central hole. Duplicate the data to the opposite area of ​​the canvas.

Next, you need to set the location for the tongue from the lock. To do this, you need to move the horizontal line to the end of the door and find the center point. After which the locking plate is applied and outlined at this point.

Making holes for the latch and handles

After carefully setting the markings, it is time to use the drill. With its help, the necessary holes will be made without much difficulty. When drilling, you should use a feather drill. It will allow you to more accurately and clearly make holes for connecting handles in the form of a square.

Important to remember! You need to buy equipment for such work after purchasing pens. This is justified by the fact that the parameters of each product are different and may not correspond to the available drills.

To work in the end part, a feather model drill is also used. The recess is made similar to the length of the snap mechanism.

Holes in the door for the handle

Then, having deliberately measured the thickness of the lining, we remove the excess with our own hands, using a chisel. We clean everything until the strip can fit tightly and completely into the door leaf.

Place the latch in the hole

Once the latch location is ready, you need to place the occupant there correctly. Difficulties will not arise if you adhere to a clear sequence.

The first thing to do is to place the locking latch in the groove that was originally cut. Next, we screw it in with two screws that are included with the product. This must be done from the end area.

After strengthening work has been carried out on the lock, the core part is immersed into it, which is secured thanks to the long screw part. A screw is placed in the decorative area belonging to the lock escutcheon.

There is a little trick to remember. For easy and smooth, and most importantly correct insertion of the core, you need to place a key in it, and the tongue must be directed to the bottom, to the closed position, and only then tighten the screw.

Installation work of handles

The technology of integrating handles into the overall structure is perhaps one of the simplest tasks performed during the entire installation period. A square-shaped rod must be inserted into the resulting hole for the handle. The next step is to fix the handle on one of the sides of the door. A couple of methods can be used for strengthening work. The first is characterized by a method of fixation using self-tapping screws. The second one welcomes the method by which screwing is carried out in the presence of ties.

Installing door handles

When the first handle has been successfully installed, you need to do the same with the second. In this way, we will establish communication between both components.

Introduction of a sheer dog plate into the design

To properly install the dog plumb plate, you need to find and mark the middle of the hole on the frame box. At home, it is customary to use toothpaste for this, but another similar ingredient can also be used.

With one hand we press the handle and hold it in this state. Meanwhile, with your other hand, apply the paste to the tip of the dog along the entire vertical edge. Then you should close the door and release the handle. At this moment the dog will come into contact with the box part.

Press the door handle again and bring it to the open position. Opening it, we find that the paste has left traces. This area will be the mark for embedding the plumb plate. This method is the most reliable and error-free. Even experts use it.

We outline the resulting imprint from the protruding part of the latch with a contour. Using a drill and a pen, we need to drill a hole for the dog. It is also necessary to make openings for self-tapping screws that act as a fastening system.

Upon completion of the preparatory work, we screw the lining in the area where the screws are located. To ensure a tight and soft fit of the door leaf in the opening, the plate located on the opposite side of the latch is subjected to a pressing process.

From the above material, the following instructions emerge:

1. We determine the attachment point of the handle with the lock;
2. We measure the locking units and mark them on both sides of the door;
3. We make recesses to place the locking apparatus and the handles themselves;
4. We first install the core, and then the handles themselves;
5. We identify the location of the vertical plate and make a recess;
6. on self-tapping screws.

After carrying out such work, you will no longer have questions about how to install a handle on an interior door. Having done this once, you can easily repeat all subsequent installations with the same success.

One more point should be taken into account. Handles with an embedded lock should only be installed on doors whose material will later be subject to painting. Good luck in your work process!

Installing a door handle on an interior door is done with your own hands, since the door blocks are not supplied with fittings. To do this, you need to select a tool to perform the required work. Each fitting comes with instructions for use. A convenient installation height from the floor covering and a design diagram are indicated. If there are no instructions on installation height, one condition is necessary for door handles. A person should not open the door in a bent position (about 1 m from the floor).

Drawing with dimensions for installing door handles

Depending on the wishes of the person, only the installation of the handle of the door opening mechanism or door handles with a mechanical or electromechanical lock is carried out. The industry produces various systems for locking a home or room. The peculiarity of locks is that millions of structures must be opened with different keys.

Installation work must be performed in a certain sequence:

Step-by-step instructions for installing a door handle

• screwdriver (drill);
• carpenter's meter, marking pencil;
• set of wood drills, bit for drilling large diameters.

All door handles can be divided into overhead and mortise. Mortise handles can be divided into rotary designs and rotary ones with a lock. To protect the lock from unauthorized opening, it is necessary to create production facilities for the production of locks and keys of various modifications and sizes.

Scheme for mounting a door handle

Installation process of door lock mechanism with handle

The process of marking a door for installing a handle

The next task is to accurately drill the hole for the handle. Having removed the latch, drill a signal hole with a small drill. Insert the latch and visually determine the accuracy of the hole in the door leaf and the hole in the latch.

The process of drilling holes for door handles

Marking the door for the groove

Installation of mortise locks with handles

Mortise locks with a rotary handle and a lock at the end of the door leaf, a special design of the lock cylinder, are produced by manufacturers of more than a million variants of locks. The number of such models available is sufficient for metal and wooden doors. Do-it-yourself installation of mortise mechanisms begins with careful marking of the mounting mechanisms on one side of the door.

Door marking diagram for installing a door lock

When working, you have to use chisels of different sizes, periodically sharpening them on a sharpening machine or whetstone at a certain angle.

After making sure that the lock structure is completely recessed into the door leaf, we make a signal hole using a drill with a thin drill for a rotary handle, having previously removed the lock from the door.


We check the accuracy of the hole and drill the door using a crown of the required size from both sides of the door to the middle of the leaf for the handle. Once the lock and handle are installed, all screws must be tightened. After checking the functionality of the lock without closing the door, you can begin marking the groove for the loot.
In the door frame opposite the lock, make a mark on the frame for the latch. Having opened the door leaf, mark, arrange and secure the door with the groove.




If the groove marking is made with an error and the lock tongue does not fit or there is a large gap, it is necessary to dismantle the groove and move the groove with a chisel. The chute pad and the lock bar should fit snugly, but without friction.

Reinstalling the handle